Bridge · Review
ActivecBridge Review 2026: Celer's Multi-Chain Asset Bridge
cBridge is Celer Network's multi-chain asset bridge, supporting transfers across dozens of EVM chains and layer-2s. It offers broad coverage, but fees and security details need to be checked directly.
By the DappsAtlas editorial team · Updated
DappsAtlas score
7.3/10
Good
Our verdict on cBridge
7.3/10cBridge suits users who need to move tokens between many EVM chains and layer-2s and want a long-running bridge with a documented security model. Its strengths are chain coverage and a simple flow. The main caveats are bridge risk, reliance on a validator network, and fee claims that are not backed by published figures. Compare quotes and start with a small transfer.
Score breakdown
How cBridge scores
- Security
- 6.8/10
- Ease of use
- 8.0/10
- Fees
- n/a
- Features
- 7.5/10
Scores run from 0 to 10 and are based only on facts we could verify. Where information was missing we mark the score n/a rather than guess.
What is cBridge?
cBridge is the asset bridge from Celer Network. It lets users move tokens between many blockchains and layer-2 networks, including Ethereum, BNB Chain, Polygon, Arbitrum, Optimism, zkSync Era, Avalanche and Linea. DefiLlama has listed it since November 2021 under the Bridge category.
The homepage calls it a multi-chain, cross-layer bridge with instant transfers, the most chains, the lowest fee and zero trust. Those are the project's own claims. DefiLlama shows roughly 12 million USD in TVL, down 1.9 percent over the past week, and lists two audits.
The project's own token is CELR. The docs include a security page, and Celer says cBridge builds on Celer IM and state channel technology originally tested in gaming apps.
How cBridge works
A bridge moves value between blockchains that cannot talk to each other directly. cBridge lets you select a token on one chain and receive the equivalent on another, so you can use it with apps on that second network.
According to public sources, cBridge is built on top of Celer IM, Celer's messaging layer, and Celer's earlier state channel technology. The docs describe a hybrid model in which security and speed tradeoffs can be chosen dynamically. A third-party comparison says validation relies on the Celer State Guardian Network, a set of validators that secures the system.
In practice, you deposit on the source chain, the network validates the transfer, and the funds are made available on the destination chain. The homepage describes this as instant, low-cost and zero trust, though users should read the security docs to understand the actual trust assumptions.
6 features
Key features
01
Wide chain coverage
DefiLlama lists more than two dozen chains, including Ethereum, major layer-2s and several sidechains. This makes it useful for routes that smaller bridges do not cover.
02
Any-to-any transfers
The project says it supports any-to-any value transfers across chains and layer-2 scaling solutions such as optimistic rollups, ZK rollups and sidechains.
03
Hybrid security model
Per the docs result, cBridge sits on top of Celer IM and supports a hybrid model so that security and speed tradeoffs can be chosen dynamically.
04
State Guardian Network
Validation relies on the Celer State Guardian Network, according to a third-party comparison cited in the results.
05
Message passing via Celer IM
The Celer IM base layer lets cBridge move arbitrary messages in addition to tokens, per a deep-dive article in the results.
06
Simple transfer flow
The project lists a straightforward flow: pick a source chain, destination chain and token, then confirm the transfer.
Pros and cons
What we like
- Very broad chain coverage, including major layer-2s and several smaller networks
- Supports any-to-any transfers across rollups and sidechains
- Built on Celer IM, which also supports arbitrary messaging
- Two audits listed on DefiLlama and a public security docs page
- Listed since 2021, so it has a multi-year presence
- Simple transfer flow documented for newcomers
Watch out for
- Smart-contract and bridge risk applies; funds sit in contracts on many chains, and the project does not describe any incident history either way
- Fee levels are described only as lowest on the homepage, with no figures
- Some listed chains such as Heco and OKExChain are of uncertain current activity, so support may be uneven
- Security depends on the Celer State Guardian Network, adding a validator-set trust assumption
- TVL of about 12 million USD is modest and fell 1.9 percent over seven days
- Only two audits are listed on DefiLlama, and the reports are not summarised
cBridge fees
The homepage claims the lowest fee among bridges, but no fee schedule or percentage is given publicly. Treat that as marketing until you compare quotes.
The app should show the bridge fee and the amount you will receive before you confirm. You would also pay network gas on the source chain, and possibly a destination-chain cost, which varies by chain. A Google result discusses plans to make CELR the fee token, but the project does not confirm the current fee model.
Is cBridge safe?
DefiLlama lists two audits for cBridge, but the project does not name the auditors or findings. The docs include a security page, and a third-party article says security relies on the Celer State Guardian Network. That means users rely on both smart contracts and a validator set.
All bridges concentrate funds in contracts and have historically been a frequent target for exploits. The project does not describe any incident for cBridge, and they do not rule one out. Check the docs and recent news before moving larger amounts, and consider splitting transfers.
6 steps
How to get started with cBridge
- 1
Open the official cBridge site and check the address carefully to avoid phishing copies.
- 2
Connect a compatible wallet such as one that supports the source chain.
- 3
Select the source chain, destination chain and the token to transfer.
- 4
Enter the amount and review the estimated fee and received amount.
- 5
Confirm the transaction in your wallet and keep some native gas token for the source chain.
- 6
Wait for completion and check the destination chain balance, starting with a small test amount if the route is new to you.
Who cBridge is for
cBridge is for DeFi users who regularly move stablecoins or other tokens across Ethereum, layer-2s and sidechains, and want one interface covering many routes. It is less suited to anyone who is uncomfortable with bridge and validator trust assumptions.
cBridge FAQs
What is cBridge?
cBridge is an asset bridge built by Celer Network. It lets users move tokens between supported blockchains and layer-2 networks, such as from BNB Chain to Arbitrum.
Which chains does cBridge support?
DefiLlama lists Ethereum, BNB Chain, Polygon, Arbitrum, Optimism, zkSync Era, Avalanche, Linea, Scroll, Gnosis, Celo, Metis and many others. Availability of a specific route and token can change, so check the app's chain and token selectors.
Is cBridge safe?
Public sources cite the Celer State Guardian Network (SGN) as the security and validation layer. Like any bridge, it carries smart-contract and validator risk, so users should avoid moving more than they can afford to lose and review the docs' security page.
What does cBridge cost?
The homepage claims the lowest fee, but no figures are. Users typically see the bridge fee and estimated received amount in the app before confirming. Gas on the source and destination chains is separate.
Does cBridge have a token?
Yes. DefiLlama lists CELR as the associated token. A Google result also discusses making CELR the transaction fee token for cBridge and Celer IM, but the project does not confirm that this has happened.
How do I transfer tokens with cBridge?
You select the source chain, destination chain and token, enter an amount, and confirm in your wallet. Timing is described as instant on the homepage, though actual speed depends on the route and network conditions.
Compare
cBridge alternatives
LayerZero V2 is a cross-chain messaging protocol and bridge infrastructure for developers and asset issuers, connecting dozens of blockchains.
Chainlink CCIP is a cross-chain messaging and token-transfer protocol for developers, token issuers and institutions, with about $1.89B TVL on 21 chains.
Unit is the asset tokenization layer on Hyperliquid, letting users deposit and withdraw native assets like BTC, ETH and SOL.
USDT0 is Tether's omnichain system that puts USDT and tokenized gold (XAUT0) on 25+ blockchains, for users and protocols needing unified stablecoin liquidity.
Hyperliquid Bridge moves USDC from Arbitrum onto the Hyperliquid Layer 1 for traders using its perpetual and spot markets.
Aster Bridge is the multichain deposit layer of Aster, a perpetuals DEX backed by YZi Labs, for traders funding one account from several chains.
Same category
More Bridges
Lombard BTC.b is a 1:1 Bitcoin representation for moving BTC across several chains in DeFi, secured by a validator consortium and redeemable for native BTC.
Wan Bridge is Wanchain's cross-chain bridge, linking over 30 networks including Bitcoin, XRPL, Ethereum and Solana, for users moving assets across chains.
sBTC is a SIP-010 token on Stacks pegged 1:1 to Bitcoin, for BTC holders who want to use their Bitcoin in DeFi and smart contracts.
FAssets is an over-collateralized bridge on Flare that lets XRP, BTC and DOGE holders mint wrapped tokens to use in DeFi.
BOB is a Bitcoin-focused EVM hybrid L2 with a Gateway for native BTC swaps, bridging and DeFi, aimed at Bitcoin holders and developers.
deBridge is a cross-chain protocol for swapping and transferring tokens and data between blockchains, aimed at users who move assets across networks.
Same chain
More on Ethereum
Lido is a liquid staking protocol where users stake ETH and receive stETH, a reward-earning token usable across DeFi, governed by LDO holders.
Aave V3 is a non-custodial DeFi lending protocol on 21 chains where users earn interest on deposits or borrow against collateral.
Uniswap V4 is the latest Uniswap DEX version with hooks and concentrated liquidity, running on 22 chains for self-custody token swaps and liquidity provision.
Uniswap V3 is a non-custodial decentralized exchange protocol for token swaps and concentrated liquidity provision across 40+ chains.
DeFi Saver is a non-custodial tool for managing and automating leveraged lending positions across major DeFi protocols on Ethereum and layer-2 networks.
OKX is a major centralized crypto exchange for spot and derivatives trading, earn products and a Web3 wallet, with its own OKB token.
Guides
Guides that mention cBridge
Blockchain
Base Blockchain Guide: How Coinbase's Layer 2 Works in 2026Base is Coinbase's Ethereum layer-2 network, built on the OP Stack and known for low fees and native USDC. This guide covers how it works, how to get funds onto it, and what to check before you use it.
Wallets and tools
Best Crypto Wallets for dApps on Popular Blockchains (2026)The right wallet depends on which chains your dApps run on. This guide compares the main options for Ethereum and EVM networks, Solana, Cosmos and multichain use, with a security checklist for connecting to dApps and bridges.
Wallets and tools
How to Install and Use Blocto Wallet on Flow (2026 Guide)Blocto is a smart-contract wallet built around Flow's multi-key account model. This guide covers installing it, creating a Flow account, moving tokens, connecting to apps and keeping the account safe.
Wallets and tools
What Is MetaMask? How the Wallet Works and How to Use It SafelyMetaMask is a free, self-custody crypto wallet that runs as a browser extension and mobile app and lets you hold tokens and connect to decentralized apps. Here is how it works, what it costs, how to use it safely and where it falls short.
How we checked
Sources
Last updated . Spotted an error? Tell us and we will correct it.