Bridge · Review
ActiveAster Bridge Review 2026: Multichain Gateway to a Perp DEX
Aster Bridge is DefiLlama's listing for the multichain deposit layer of Aster, a perpetuals DEX backed by YZi Labs. It lets traders fund one account from several chains, but audit and fee details are not published publicly.
By the DappsAtlas editorial team · Updated
DappsAtlas score
6.5/10
Good
Our verdict on Aster Bridge
6.5/10Aster Bridge suits experienced traders who want to fund a single perpetuals account from BNB Chain, Ethereum, Arbitrum or Solana. Its strengths are broad chain support, sizeable TVL on DefiLlama and a single-account setup. The main caveat is transparency: no audits are listed, bridge fees are not published, and settlement relies on validators. Treat 1001x leverage as extremely risky and read the official docs before depositing.
Score breakdown
How Aster Bridge scores
- Security
- 5.5/10
- Ease of use
- 7.0/10
- Fees
- n/a
- Features
- 7.5/10
Scores run from 0 to 10 and are based only on facts we could verify. Where information was missing we mark the score n/a rather than guess.
What is Aster Bridge?
Aster Bridge is the entry DefiLlama uses to track Aster's cross-chain funds. Aster itself is a decentralized perpetual exchange. It offers one-click trading in Simple Mode and pro tools in Pro Mode, and it is backed by YZi Labs. The listing dates from July 2024.
DefiLlama shows roughly 577 million dollars in TVL across BNB Chain, Ethereum, Arbitrum, Solana and Scroll, up 8.2 percent over seven days. The Aster homepage reports larger figures for the whole platform, including 1.46 billion dollars TVL, 2.82 billion dollars open interest and 51.77 million users. These are self-reported and not independently verified.
The homepage also mentions a live prediction market, an L1 called Aster Chain, and mobile apps. This review treats the bridge as the on-ramp to that exchange rather than a general-purpose bridge.
How Aster Bridge works
Aster is a decentralized perpetual exchange. A perpetual is a derivative that tracks an asset price with no expiry, and traders can borrow to increase exposure. Aster Bridge is the part that moves collateral from supported chains into the trading account.
According to the homepage, users trade across BNB Chain, Arbitrum, Ethereum and Solana from a single account. Cross-chain settlements are signed by validators and take about 30 seconds. Aster also describes its own L1, Aster Chain, built for derivatives execution.
Idle margin can be held in USDF, which the homepage calls a yield-bearing stablecoin, so collateral can earn while it backs positions. The project does not explain how that yield is generated, so readers should check the docs.
7 features
Key features
01
Multichain single account
Funds can come from BNB Chain, Ethereum, Arbitrum and Solana into one account, according to the homepage. DefiLlama also lists Scroll.
02
Validator-signed settlement
The homepage says cross-chain settlements are validator-signed and complete in roughly 30 seconds.
03
Simple and Pro modes
Simple Mode offers one-click trading with up to 1001x leverage. Pro Mode offers full-featured trading tools.
04
Yield on idle margin
The homepage says USDF, a yield-bearing stablecoin, earns on idle margin while users trade.
05
Aster Chain L1
Aster Chain is described as a purpose-built L1 with 50ms block times and zero gas, aimed at derivatives execution.
06
Privacy features
The homepage describes stealth addresses and ZK-encrypted orders, decryptable with a viewer pass.
07
Broad market range
The homepage lists crypto, stocks, forex, commodities and prediction markets, with 483 assets shown.
Pros and cons
What we like
- Supports several major chains: BNB Chain, Ethereum, Arbitrum, Solana and Scroll per DefiLlama.
- One account across chains, so traders do not need to split collateral by network.
- Large TVL on DefiLlama, around 577 million dollars, which suggests meaningful usage.
- Described as non-custodial, with a stated settlement time of about 30 seconds.
- Backed by YZi Labs, according to the DefiLlama description.
- Yield-bearing USDF is offered on idle margin.
Watch out for
- DefiLlama lists no audits for this entry, so security claims cannot be checked.
- Settlements are validator-signed, which means users rely on a validator set rather than a purely trustless design.
- Leverage of up to 1001x in Simple Mode can wipe out a position very quickly.
- No fee schedule for the bridge or for trading is published publicly.
- Aster does not appear to have a token listed on DefiLlama, and its homepage does not name one, so token details are unclear.
- Homepage figures such as users, volume and TVL are self-reported and differ from the DefiLlama TVL for this entry.
Aster Bridge fees
Bridge fees are not published. The Aster homepage says only that the exchange has low fees and zero gas on Aster Chain, without giving figures.
Users should expect to see deposit and withdrawal costs, source-chain gas, and trading fees in the Aster app and the official docs before confirming a transfer.
Is Aster Bridge safe?
DefiLlama lists zero audits for this entry. The homepage describes Aster as secure and non-custodial, but the project does not include audit reports, a bug bounty, or an incident history. Check the official docs for those before depositing.
Cross-chain settlements are validator-signed, so safety depends on that validator set and the bridge contracts. Bridges are a common target for exploits. High leverage, up to 1001x in Simple Mode, adds trading risk on top of technical risk. Derivatives trading may be restricted in some jurisdictions, so confirm it is legal where you live. Only use funds you can afford to lose.
6 steps
How to get started with Aster Bridge
- 1
Read the official docs for supported chains, assets and any published audit reports.
- 2
Check that online derivatives trading is legal and allowed where you live.
- 3
Connect a self-custody wallet on a supported chain such as BNB Chain, Arbitrum, Ethereum or Solana.
- 4
Start with a small deposit and confirm the fees shown in the app before approving.
- 5
Wait for the validator-signed settlement, which the homepage says takes about 30 seconds.
- 6
Choose Simple or Pro Mode and set conservative leverage, since high leverage raises liquidation risk.
Who Aster Bridge is for
Aster Bridge is for active derivatives traders who already use self-custody wallets and want one account across several chains. It is a poor fit for beginners, anyone unfamiliar with leverage, or users who require published audits and a clear fee schedule before depositing.
Aster Bridge FAQs
What is Aster Bridge?
DefiLlama lists Aster Bridge as a Bridge-category entry tied to Aster, a decentralized perpetual exchange. It covers moving funds between supported chains and the Aster trading account. The project does not describe it as a standalone general-purpose bridge.
Which chains does Aster Bridge support?
DefiLlama lists BNB Chain, Ethereum, Arbitrum, Solana and Scroll. The Aster homepage names BNB Chain, Arbitrum, Ethereum and Solana for trading from a single account.
How long do Aster transfers take?
The homepage says settlements are validator-signed and take about 30 seconds. Actual times can vary with network conditions, and public sources give no guarantees.
Is Aster Bridge safe?
The homepage describes Aster as secure and non-custodial, but DefiLlama lists zero audits for this entry. Readers should check the official docs for audit reports and review the validator-signing model before depositing.
What does Aster Bridge cost?
Fees are not stated publicly. The homepage says only that the exchange has low fees. Users would see the actual bridge and trading costs in the app and the official docs.
How much value is held in Aster Bridge?
DefiLlama shows about 577 million dollars in TVL for this entry, up 8.2 percent over seven days. The homepage separately claims 1.46 billion dollars TVL for Aster overall. These measure different things, so do not compare them directly.
Compare
Aster Bridge alternatives
LayerZero V2 is a cross-chain messaging protocol and bridge infrastructure for developers and asset issuers, connecting dozens of blockchains.
Chainlink CCIP is a cross-chain messaging and token-transfer protocol for developers, token issuers and institutions, with about $1.89B TVL on 21 chains.
Unit is the asset tokenization layer on Hyperliquid, letting users deposit and withdraw native assets like BTC, ETH and SOL.
USDT0 is Tether's omnichain system that puts USDT and tokenized gold (XAUT0) on 25+ blockchains, for users and protocols needing unified stablecoin liquidity.
Hyperliquid Bridge moves USDC from Arbitrum onto the Hyperliquid Layer 1 for traders using its perpetual and spot markets.
cBridge is Celer Network's multi-chain bridge for moving tokens across Ethereum, layer-2s and sidechains, for DeFi users who bridge between many networks.
Same category
More Bridges
Lombard BTC.b is a 1:1 Bitcoin representation for moving BTC across several chains in DeFi, secured by a validator consortium and redeemable for native BTC.
Wan Bridge is Wanchain's cross-chain bridge, linking over 30 networks including Bitcoin, XRPL, Ethereum and Solana, for users moving assets across chains.
sBTC is a SIP-010 token on Stacks pegged 1:1 to Bitcoin, for BTC holders who want to use their Bitcoin in DeFi and smart contracts.
FAssets is an over-collateralized bridge on Flare that lets XRP, BTC and DOGE holders mint wrapped tokens to use in DeFi.
BOB is a Bitcoin-focused EVM hybrid L2 with a Gateway for native BTC swaps, bridging and DeFi, aimed at Bitcoin holders and developers.
deBridge is a cross-chain protocol for swapping and transferring tokens and data between blockchains, aimed at users who move assets across networks.
Same chain
More on BNB Chain
Aave V3 is a non-custodial DeFi lending protocol on 21 chains where users earn interest on deposits or borrow against collateral.
Uniswap V4 is the latest Uniswap DEX version with hooks and concentrated liquidity, running on 22 chains for self-custody token swaps and liquidity provision.
Uniswap V3 is a non-custodial decentralized exchange protocol for token swaps and concentrated liquidity provision across 40+ chains.
Morpho Blue is a permissionless lending primitive with about $11.4 billion in TVL on DefiLlama, accessed mainly through curated vaults.
Uniswap V2 is a non-custodial automated market maker DEX on 17 chains for token swaps and liquidity provision, with about $938M TVL.
Euler V2 is a modular DeFi lending protocol for lenders, borrowers and market curators, with about $268M TVL across 16 chains.
How we checked
Sources
Last updated . Spotted an error? Tell us and we will correct it.