DEXes · Review
ActiveKodiak V3 Review 2026: Uniswap V3 Fork on Berachain
Kodiak V3 is a Uniswap V3 fork on Berachain where users swap tokens or supply concentrated liquidity. It has about $14.7 million in TVL and two listed audits, but a short track record.
By the DappsAtlas editorial team · Updated
DappsAtlas score
6.3/10
Mixed
Our verdict on Kodiak V3
6.3/10Kodiak V3 suits users already active on Berachain who want a familiar Uniswap V3-style place to swap tokens or run concentrated liquidity positions. Its strengths are a proven design, a clear single-chain focus and two listed audits. The main caveats are a short track record, modest TVL, unpublished fee and team details, and the usual impermanent loss and smart-contract risks. Read the audits and check pool fees before depositing.
Score breakdown
How Kodiak V3 scores
- Security
- 5.5/10
- Ease of use
- 6.5/10
- Fees
- n/a
- Features
- 6.0/10
Scores run from 0 to 10 and are based only on facts we could verify. Where information was missing we mark the score n/a rather than guess.
What is Kodiak V3?
Kodiak V3 is a decentralized exchange on Berachain. It is described as a Uniswap V3 fork, and its interface lets users swap tokens or provide liquidity on the network.
The project has been listed since February 2025 and holds about $14.7 million in total value locked, with a roughly 4.1% drop over the past seven days. It has its own token, KDK, and two audits are listed for it.
The homepage is brief and the project does not publish details such as fee tiers, team members or audit reports there, so users need to check the interface and documentation for specifics.
How Kodiak V3 works
Kodiak V3 uses an automated market maker model. Instead of an order book, trades happen against liquidity pools funded by users. A swap changes the ratio of the two tokens in the pool, and the pool's formula sets the price.
Because it is a Uniswap V3 fork, liquidity providers can concentrate their funds inside a chosen price range. This makes capital more efficient and can earn more fees while the price stays in range. Once the price moves outside the range, the position stops earning fees until it is adjusted.
Liquidity providers earn a share of swap fees from the pool but carry impermanent loss, which is the gap between holding tokens in a pool and simply holding them in a wallet.
5 features
Key features
01
Token swaps
Users can exchange tokens on Berachain directly from their own wallet through the Kodiak interface.
02
Concentrated liquidity
As a Uniswap V3 fork, it lets liquidity providers pick a price range for their capital instead of spreading it across all prices.
03
Berachain focus
The deployment is built specifically for Berachain, so it serves that network's token pairs.
04
KDK token
The project has its own token, KDK, which sits alongside the exchange.
05
Listed audits
Two audits are listed for the project, which is a baseline sign of external review.
Pros and cons
What we like
- Familiar Uniswap V3 design with concentrated liquidity and price ranges.
- Built for Berachain, offering swaps and liquidity provision on that network.
- Two audits are listed for the project.
- Non-custodial: trades and positions are handled from the user's own wallet.
- Roughly $14.7 million in TVL shows real capital committed.
Watch out for
- Concentrated liquidity positions need active management and can lose value to impermanent loss.
- Liquidity is tied to a single chain, Berachain, so activity depends on that ecosystem's health.
- Seven-day TVL fell about 4.1%, and TVL of roughly $14.7 million is modest next to the largest DEXs.
- Fee tiers, team details and audit reports are not published on the homepage.
- The deployment is recent, listed since February 2025, so it has a short track record.
- The KDK token and any incentives add price and emissions risk.
Kodiak V3 fees
Kodiak V3 does not publish a fee schedule on its homepage. In Uniswap V3-style designs, each pool normally has a set swap fee that goes mostly to liquidity providers, and the interface shows it before you confirm.
Beyond swap fees, you also pay Berachain network gas, and slippage on thinly traded pairs can cost more than the headline fee. Check the pool tier and price impact before every trade or deposit.
Is Kodiak V3 safe?
Two audits are listed for Kodiak V3, but the homepage does not name the auditors or link their findings. Audits reduce but do not eliminate smart-contract risk, and a fork of widely used code still carries risks from modifications, chain-specific integrations and admin permissions. These details are not published on the homepage.
The exchange is non-custodial, so you keep control of your assets in your wallet, but you also bear all risk of mistakes, approvals and phishing sites. The project does not publish a regulatory status. Verify the official address before connecting a wallet, and check whether using DeFi services is allowed where you live.
6 steps
How to get started with Kodiak V3
- 1
Set up a wallet that supports Berachain and keep some of the network's gas token in it.
- 2
Open the official Kodiak interface and check the address in your browser carefully.
- 3
Connect your wallet and select the tokens you want to swap, reviewing the quoted price, fee and slippage.
- 4
To provide liquidity, choose a pool and a fee tier, then set a price range for your position.
- 5
Approve the token spend and confirm the transaction in your wallet.
- 6
Monitor any liquidity position regularly and adjust or withdraw if the price leaves your range.
Who Kodiak V3 is for
Kodiak V3 is for people who already use Berachain and want to swap tokens or earn fees as liquidity providers. It suits users who understand price ranges and impermanent loss. Newcomers to DeFi should start with small amounts and learn how pools work first.
Kodiak V3 FAQs
What is Kodiak V3?
Kodiak V3 is a decentralized exchange on Berachain built as a fork of Uniswap V3. Users can swap tokens or provide liquidity through the Kodiak interface.
Which blockchain does Kodiak V3 use?
It runs on Berachain. The project's listing names no other chain for this V3 deployment.
Does Kodiak have a token?
Its token is KDK. What it is used for beyond what the project describes on its own channels is not stated here, so check the official documentation before buying.
Is Kodiak V3 audited?
Two audits are listed for the project, but the homepage does not detail who performed them or what they found. An audit lowers risk but does not remove it, and you should read the reports yourself.
What fees does Kodiak V3 charge?
Fees are not published on the homepage. Uniswap V3-style pools usually have a swap fee set per pool, and you can see the figure in the interface before confirming a trade or opening a position.
Can I lose money providing liquidity?
Yes. Impermanent loss, price moving out of your chosen range, smart-contract bugs and token volatility can all reduce your funds. Only supply what you can afford to lose.
Compare
Kodiak V3 alternatives
Uniswap V3 is a non-custodial decentralized exchange protocol for token swaps and concentrated liquidity provision across 40+ chains.
Uniswap V4 is the latest Uniswap DEX version with hooks and concentrated liquidity, running on 22 chains for self-custody token swaps and liquidity provision.
Uniswap V2 is a non-custodial automated market maker DEX on 17 chains for token swaps and liquidity provision, with about $938M TVL.
WOOFi Swap is a non-custodial multi-chain DEX for swaps, cross-chain trades, single-sided yield, staking and perpetual futures, tied to the WOO token.
BEX is the native decentralized exchange on Berachain, accessed via BeraHub, for users who swap tokens and join Proof of Liquidity rewards.
PancakeSwap AMM V3 is a multichain decentralized exchange using concentrated liquidity pools, for traders and liquidity providers, led by BNB Chain.
Same category
More DEXes
Curve is a decentralized exchange on Ethereum built for low-slippage swaps of stablecoins and similar assets, with CRV governance and a crvUSD stablecoin.
PancakeSwap is a BNB Smart Chain decentralized exchange with swaps, farming, staking and CAKE governance for self-custody DeFi users.
PancakeSwap V2 is a constant-product AMM DEX mainly on BNB Chain for swapping tokens, providing liquidity and farming CAKE rewards.
THORChain is a Layer 1 DEX for swapping native assets across blockchains without wrapped tokens or bridges, aimed at self-custody and no-KYC users.
Raydium is a decentralized exchange and automated market maker on Solana, built around fast, low-cost swaps and liquidity pools.
QuickSwap is a multichain DEX, started on Polygon, offering swaps, liquidity pools, farms, QUICK staking and perpetuals for self-custody DeFi users.
Same chain
More on Berachain
LayerZero V2 is a cross-chain messaging protocol and bridge infrastructure for developers and asset issuers, connecting dozens of blockchains.
Euler V2 is a modular DeFi lending protocol for lenders, borrowers and market curators, with about $268M TVL across 16 chains.
Sablier Lockup is an audited onchain protocol for token vesting, payroll, grants and airdrops, aimed at DAOs and businesses across many chains.
ether.fi Stake is a non-custodial Ethereum liquid staking protocol with an app for earning, borrowing and spending, for ETH holders comfortable with DeFi risk.
Dolomite is a multi-chain DeFi money market for lending, borrowing and leveraged strategies across 1,000+ assets, with its own DOLO token.
Team Finance is a non-custodial platform where token projects create tokens, lock liquidity and team tokens, set up vesting, run staking pools and airdrops.
How we checked
Sources
Last updated . Spotted an error? Tell us and we will correct it.