DEXes · Review
ActiveEGAS Swap Review 2026: ENI utility swaps
EGAS Swap is an ENI-chain utility swap for trading EGAS with supported ERC-20 assets, chiefly to obtain tokens for gas. Its proxy-based liquidity custody and limited disclosures call for caution.
By the DappsAtlas editorial team · Updated
DappsAtlas score
4.0/10
Weak
Our verdict on EGAS swap
4.0/10EGAS Swap is most relevant to ENI users who need EGAS for network gas or want to trade an asset supported by its swap interface. Its main strength is a narrow, practical purpose: converting between EGAS and ERC-20 assets. The main caveats are substantial disclosure gaps: fees, supported markets, proxy controls, and audits are not published. The reported TVL is modest, so check current liquidity and trade terms before using it. Treat proxy custody and the absence of listed audits as meaningful risks.
Score breakdown
How EGAS swap scores
- Security
- 2.5/10
- Ease of use
- n/a
- Fees
- n/a
- Features
- 3.0/10
Scores run from 0 to 10 and are based only on facts we could verify. Where information was missing we mark the score n/a rather than guess.
What is EGAS swap?
EGAS Swap is a utility-focused swap protocol on ENI. It lets users trade EGAS with supported ERC-20 assets, primarily to obtain EGAS for network gas payments. The project says more assets may be added, but does not identify them.
The protocol uses an ERC1967 proxy contract to hold liquidity. Its reported TVL is $5,739; this figure can change and does not establish how easy it is to trade or exit a position. Fees, proxy controls, team details, and audits are not published.
How EGAS swap works
EGAS Swap is described as a native ENI-chain protocol for swapping EGAS with supported ERC-20 assets. Its main stated use is helping users obtain EGAS for gas payments, with token swaps as an additional function. The other supported assets are not named.
Liquidity is held through an ERC1967 proxy contract. Proxy contracts can separate an interface from the underlying contract implementation, but the project does not publish who controls this proxy or how upgrades are governed. That makes the custody and upgrade arrangements important questions for users to check.
4 features
Key features
01
Token swaps
Trades EGAS against supported ERC-20 assets on ENI.
02
Gas-token access
The protocol is intended to help users obtain EGAS for ENI gas payments.
03
Proxy-held liquidity
An ERC1967 proxy contract is described as holding the protocol's liquidity.
04
Planned asset support
The project says additional assets may be supported in the future, but does not name them.
Pros and cons
What we like
- Provides a stated route to obtain EGAS for ENI gas payments.
- Supports swaps between EGAS and ERC-20 assets.
- Has a clear utility-focused purpose on the ENI chain.
Watch out for
- The swap is described as supporting EGAS and ERC-20 assets, but the other supported tokens are not named.
- Fees and swap pricing details are not published.
- The ERC1967 proxy holds liquidity, but its upgrade controls and custody safeguards are not described.
- No audits are listed, and the reported TVL is modest at $5,739.
- The project does not publish details about its team or security track record.
EGAS swap fees
EGAS Swap does not publish its swap fees or pricing details. Check the XPlan interface before confirming a trade. Network gas is separate from any swap fee; EGAS is used for gas payments on ENI.
Is EGAS swap safe?
The protocol uses an ERC1967 proxy contract to hold liquidity. The project does not publish details about who controls the proxy, its upgrade process, or the safeguards around liquidity. These unknowns create smart-contract and custody risks.
No audits are listed. The project also does not publish team details or a security track record. The reported TVL is $5,739, which may mean limited liquidity; users should check current trade quotes and available exit liquidity before swapping.
5 steps
How to get started with EGAS swap
- 1
Open XPlan and look for the EGAS Swap interface.
- 2
Confirm that your wallet and selected network are compatible with ENI.
- 3
Check the available EGAS and ERC-20 trading pairs in the interface.
- 4
Review the quoted output, any displayed swap fee, and the required network gas before proceeding.
- 5
Confirm the swap in your wallet only if the terms match your expectations.
Who EGAS swap is for
EGAS Swap may suit people already using ENI who need EGAS for gas payments, or who want to swap into an asset currently supported by the interface. It is a weaker fit for users who need a broad token selection, published fee schedules, or clear information about contract administration and audits.
EGAS swap FAQs
What chain does EGAS Swap use?
EGAS Swap is described as a native swap protocol on ENI. ENI is not included in the chain list used here, so confirm network compatibility in the XPlan interface before connecting a wallet.
Which tokens can I swap on EGAS Swap?
The protocol supports swaps between EGAS and supported ERC-20 assets. The other supported tokens are not named, so check the swap interface for current markets.
What are EGAS Swap's fees?
The project does not publish its swap fees or pricing details. Network gas is a separate cost, and EGAS is used for gas payments on ENI.
Is EGAS Swap audited or safe?
The project describes an ERC1967 proxy contract that holds liquidity. No audits are listed, and details about proxy administration and upgrade controls are not published.
Who is EGAS Swap for?
The described purpose is to swap into EGAS for ENI gas payments, as well as trade supported ERC-20 assets. It may suit ENI users who need EGAS, but the limited token and fee disclosures make it harder to assess before trading.
Compare
EGAS swap alternatives
Hydration is a DeFi appchain combining a DEX, lending and the HOLLAR stablecoin, aimed at users who want yield and liquidity strategies in one place.
Uniswap V3 is a non-custodial decentralized exchange protocol for token swaps and concentrated liquidity provision across 40+ chains.
Uniswap V4 is the latest Uniswap DEX version with hooks and concentrated liquidity, running on 22 chains for self-custody token swaps and liquidity provision.
Uniswap V2 is a non-custodial automated market maker DEX on 17 chains for token swaps and liquidity provision, with about $938M TVL.
PancakeSwap AMM V3 is a multichain decentralized exchange using concentrated liquidity pools, for traders and liquidity providers, led by BNB Chain.
Gala Swap is a non-custodial DEX on GalaChain for swapping Gala ecosystem tokens and earning fees through concentrated liquidity pools.
Same category
More DEXes
Curve is a decentralized exchange on Ethereum built for low-slippage swaps of stablecoins and similar assets, with CRV governance and a crvUSD stablecoin.
PancakeSwap is a BNB Smart Chain decentralized exchange with swaps, farming, staking and CAKE governance for self-custody DeFi users.
PancakeSwap V2 is a constant-product AMM DEX mainly on BNB Chain for swapping tokens, providing liquidity and farming CAKE rewards.
THORChain is a Layer 1 DEX for swapping native assets across blockchains without wrapped tokens or bridges, aimed at self-custody and no-KYC users.
Raydium is a decentralized exchange and automated market maker on Solana, built around fast, low-cost swaps and liquidity pools.
QuickSwap is a multichain DEX, started on Polygon, offering swaps, liquidity pools, farms, QUICK staking and perpetuals for self-custody DeFi users.
Same chain
More on Other
Figure Markets is a Provenance-based exchange offering trading, crypto-backed loans and real-world-asset yield with MPC custody for crypto holders and borrowers
IoTeX is an EVM-compatible Layer-1 blockchain for DePIN and real-world AI, with ioID, staking, a bridge and the IOTX token, aimed at builders and stakers.
Hydration Lending is a decentralized money market on the Hydration Polkadot appchain for supplying collateral, earning interest and borrowing assets like HOLLAR
Reya Perps is a perpetual futures DEX on Reya Network, a zk-powered based rollup built for gas-free derivatives trading by active traders.
Chainflip Lending is a cross-chain lending market for borrowing against native BTC, ETH, SOL and stablecoins without wrapped tokens or bridges.
Potlock is an open funding platform where projects raise money through campaigns and matching rounds, with multi-chain donations via NEAR Intents.
How we checked
Sources
Last updated . Spotted an error? Tell us and we will correct it.