Token Locker · Review
ActiveUNCX Network V2 Review 2026: Liquidity Locks and Vesting
UNCX Network (formerly UniCrypt) provides liquidity locking, token vesting and staking tools for crypto projects. DefiLlama lists about $140 million in TVL for V2, mostly useful as a way to check a team's commitments.
By the DappsAtlas editorial team · Updated
DappsAtlas score
7.6/10
Good
Our verdict on UNCX Network V2
7.6/10UNCX Network V2 suits token teams that want to make liquidity and vesting commitments public and checkable, and holders who want to verify those commitments. Its strengths are a focused product set, broad network coverage and a long operating history. The main caveat is that a lock addresses only one risk: it does not make a token safe, and fees vary by product and are not stated on the homepage. Check the fee schedule and audit reports before use.
Score breakdown
How UNCX Network V2 scores
- Security
- 7.5/10
- Ease of use
- 7.5/10
- Fees
- 5.5/10
- Features
- 7.5/10
Scores run from 0 to 10 and are based only on facts we could verify. Where information was missing we mark the score n/a rather than guess.
What is UNCX Network V2?
UNCX Network, formerly known as UniCrypt, is a DeFi infrastructure provider for token projects. Its X profile describes it as a multi-chain service provider since 2020 and the creator of liquidity locking. This listing, UNCX Network V2, is tracked on DefiLlama in the Token Locker category and has been listed since May 2022.
The product set covers liquidity lockers, token vesting, a token minter, and staking and farming. The homepage describes the aim as liquidity locking, token vesting and infrastructure for teams building for the long term.
DefiLlama shows about $140.4 million in TVL for this listing, with a 7-day change of -0.1%. The homepage shows a higher total of $166.4 million, which probably covers more products or networks. The project does not explain the difference. The protocol has its own token, UNCX, and DefiLlama lists two audits.
How UNCX Network V2 works
A project that has launched a token usually creates a liquidity pool on a decentralized exchange. The LP token or position represents the right to withdraw that liquidity. If the team holds it, it could pull the liquidity out, which is the classic rug pull. A locker contract holds the position until a set date, so it cannot be withdrawn before then.
UNCX liquidity lockers work by connecting the wallet that holds the position, choosing a network, pool and unlock date, paying the fee and confirming. The lock is public and visible onchain. Locks can be extended but not shortened.
Token vesting works similarly for team and investor allocations. Tokens are held in a schedule with cliffs, linear releases or stepped releases, and each recipient has a record. Staking and farming let a project deposit its own reward budget so that token holders or LP providers can earn over a set timeline.
7 features
Key features
01
Liquidity lockers
Lock the LP position that represents a share of an existing trading pool, with a duration chosen by the project and a public unlock date visible onchain. Supported positions include V2, V3 and V4 on EVM chains, plus supported Solana pools.
02
Fee collection while locked
Lockers let projects collect LP fees while the position is locked, so the commitment does not have to mean giving up fee income.
03
Token vesting schedules
Set cliffs, linear releases or stepped releases for team, advisor and investor tokens, with individual recipients, amounts and release dates.
04
Public vesting explorer
Anyone can explore public vesting schedules and see how tokens are released over time, starting from a token address and network.
05
Staking and farming
Projects can fund staking pools for token holders or farms for liquidity providers, setting the reward token, budget and distribution timeline.
06
Token minter
A tool for planning the core details of an ERC-20 token. The project notes that a token does not need to be created with UNCX to use its other products.
07
Verifiable lock records
Each lock and vesting record has a shareable page, and the underlying transactions can be checked on a block explorer.
Pros and cons
What we like
- Clear, narrow purpose: verifiable liquidity locks and vesting that let communities check a team's commitments onchain.
- Wide network coverage, with nine chains on DefiLlama and more on the homepage, including Solana.
- Supports V2, V3 and V4 liquidity positions on supported EVM chains.
- Lockers allow collecting LP fees while the position is locked.
- Vesting offers cliffs, linear and stepped releases with per-recipient schedules.
- Operating since 2020 according to its X profile, with significant TVL and two listed audits.
Watch out for
- Does not protect against a bad token: the project's own FAQ says a lock restricts withdrawal of the locked position but does not guarantee the safety of the token itself.
- Product and network availability varies, so a given pool or chain may not be supported for every product.
- Service fees vary by product and configuration and are not stated on the homepage, so users must check the schedule before each transaction.
- Locks cannot be shortened or withdrawn early, so a mistake in choosing the unlock date cannot be reversed.
- Only two audits are listed on DefiLlama, and the project does not detail their scope, so users should read the reports themselves.
- Rewards for staking and farming are not generated automatically; projects must fund them, which makes their value depend on the project.
UNCX Network V2 fees
UNCX says service fees are separate from network gas and vary by product and configuration. The homepage does not list specific percentages or amounts, and none appear, so none are stated here.
Users should open the product fees page linked from the homepage and review the schedule before confirming any lock, vesting or reward transaction. Gas in the network's native token is also needed.
Is UNCX Network V2 safe?
UNCX lists audit reports on its homepage, and DefiLlama counts two audits. The project does not name the auditors or give their findings, so readers should open the reports and check scope and dates. Locker contracts hold user assets, so smart-contract risk applies even with audits.
A lock is only a commitment about one asset. The project's FAQ states that a lock does not guarantee the safety of the token itself. Check the token's contract, team allocations and vesting before relying on a lock as a trust signal.
Public sources mention no hacks or incidents, but that does not prove there were none. Fees and network availability can change, so check the app and docs directly.
6 steps
How to get started with UNCX Network V2
- 1
Decide what you need: a liquidity lock, a vesting schedule, or a staking or farming pool.
- 2
Check the supported networks and products table, because availability varies by product and chain.
- 3
Prepare a compatible wallet, the relevant assets (such as LP tokens) and the native token for gas.
- 4
Open the app, connect the wallet, select the network and pool, and choose the unlock date or schedule.
- 5
Review the details and the current fee schedule, approve the asset, then confirm the transaction.
- 6
Share the lock or vesting page in your tokenomics documentation so the community can verify it on a block explorer.
Who UNCX Network V2 is for
UNCX is aimed at token creators and project teams that have a liquidity pool and want to lock it, schedule team and investor releases, or fund staking and farming rewards. It is also useful for investors and community members who want to inspect a project's locks and vesting schedules before buying.
UNCX Network V2 FAQs
What is UNCX Network?
UNCX Network is a multi-chain service provider for token projects. It offers liquidity lockers, token vesting, a token minter, and staking and farming tools. Its X profile says UniCrypt is officially becoming known as UNCX Network.
How does UNCX liquidity locking work?
A project connects the wallet holding its LP tokens or liquidity position, picks a supported network and pool, and chooses an unlock date. After it approves the asset and confirms the transaction, the lock page can be shared so the community can check the commitment.
Can locked liquidity be withdrawn early?
No. According to the project's FAQ, locked liquidity cannot be withdrawn before its unlock date. A lock can be extended but not shortened.
Does a UNCX lock mean a token is safe?
No. A lock restricts withdrawal of the locked liquidity position, but the project says it does not guarantee the safety of the token itself. Other risks, such as team token sales or contract flaws, remain, so a lock is one signal among several.
Which networks does UNCX support?
Public sources list Ethereum, BNB Chain, Base, Polygon, Arbitrum, Avalanche, Robinhood Chain, Optimism and Gnosis for this V2 listing. The homepage also mentions Solana, Unichain, HyperEVM, Krown and Arc, and notes that product and pool support varies by network.
What are UNCX fees?
Service fees are separate from gas and vary by product and configuration. The homepage points to a product fees page, which should be reviewed before any transaction.
Compare
UNCX Network V2 alternatives
Team Finance is a non-custodial platform where token projects create tokens, lock liquidity and team tokens, set up vesting, run staking pools and airdrops.
UNCX Network V3 is a token locker that lets projects lock V3-style liquidity positions on EVM chains and publish a verifiable unlock date.
GoPlus Locker V3 is a multi-chain token and liquidity locker from GoPlus Security, used by projects to lock assets by time or target price.
FlokiFi Locker is a multi-chain smart-contract service for locking and vesting LP tokens, tokens, NFTs and ERC-1155 assets, built by the Floki team.
Bitbond Lockers is a no-code, non-custodial token locker inside Bitbond's Token Tool, used by projects to lock team and liquidity tokens on seven EVM chains.
GoPlus Locker V2 is a multi-chain token and liquidity locker by GoPlus Security, letting issuers lock assets with time and target-price unlock conditions.
Same category
More Token Lockers
DaVinciGraph is a Hedera token management suite for locking, vesting, burning and creating tokens, aimed at project teams.
StakePoint is a non-custodial Solana platform for token and LP locking, vesting, staking pools and LP farms, aimed at token project teams.
Coinscope is a multi-chain token and liquidity locker with vesting tools, attached to a coin listing and promotion site, for project teams and token holders.
TokenTools’ Token Locker lets crypto project teams lock tokens or liquidity through smart contracts across several supported chains.
SovCube is an Ethereum dApp for BSOV holders to timelock tokens, with stated rewards and planned community treasury governance.
Team Finance provides token locks, vesting contracts and custom token creation for crypto projects managing launches and token distributions.
Same chain
More on Ethereum
Lido is a liquid staking protocol where users stake ETH and receive stETH, a reward-earning token usable across DeFi, governed by LDO holders.
Aave V3 is a non-custodial DeFi lending protocol on 21 chains where users earn interest on deposits or borrow against collateral.
Uniswap V4 is the latest Uniswap DEX version with hooks and concentrated liquidity, running on 22 chains for self-custody token swaps and liquidity provision.
Uniswap V3 is a non-custodial decentralized exchange protocol for token swaps and concentrated liquidity provision across 40+ chains.
DeFi Saver is a non-custodial tool for managing and automating leveraged lending positions across major DeFi protocols on Ethereum and layer-2 networks.
OKX is a major centralized crypto exchange for spot and derivatives trading, earn products and a Web3 wallet, with its own OKB token.
How we checked
Sources
Last updated . Spotted an error? Tell us and we will correct it.