Payments · Review
ActiveSablier Legacy Review 2026: Withdrawing From Original Token Streams
Sablier Legacy is the original 2019 version of Sablier's token streaming protocol, kept online so recipients can still reach older streams. It suits existing users rather than newcomers looking to start new vesting or payroll.
By the DappsAtlas editorial team · Updated
DappsAtlas score
6.0/10
Mixed
Our verdict on Sablier Legacy
6.0/10Sablier Legacy is useful if you were paid or vested through the original Sablier contracts and need to withdraw. Its strength is a long-running, non-custodial design across seven networks, with two audits listed. Its caveat is that it is a legacy interface with minimal on-page guidance and no published fee details. New users planning vesting, payroll or airdrops should look at the current Sablier app instead, and everyone should verify the site address before connecting a wallet.
Score breakdown
How Sablier Legacy scores
- Security
- 6.5/10
- Ease of use
- 6.0/10
- Fees
- n/a
- Features
- 4.5/10
Scores run from 0 to 10 and are based only on facts we could verify. Where information was missing we mark the score n/a rather than guess.
What is Sablier Legacy?
Sablier Legacy is the original version of Sablier, a protocol for streaming tokens to recipients over time. It was released in 2019, and the site title describes it as the Recipient interface for the legacy version of Sablier Lockup.
The tracked listing places it under payments and shows deployments on seven networks: Ethereum, Polygon, BNB Chain, Arbitrum, Ronin, Optimism and Avalanche. It lists about $516,000 in total value locked, up roughly 1.4% over seven days, and two audits. There is no native token.
This is not the place to start new vesting or payroll. Sablier's current app is where DAOs and businesses set up vesting, payroll and airdrops. The legacy site exists for people who already have funds in older streams and need to withdraw them.
How Sablier Legacy works
Sablier streams tokens over time. A sender locks a token amount into a smart contract and sets a start, an end and a recipient. The balance becomes claimable gradually, so the recipient can withdraw what has accrued at any point instead of waiting for a lump sum.
This legacy site is the recipient view for the original contracts. A recipient connects a wallet, sees the streams addressed to it, and withdraws available tokens. The page itself shows little more than its title, so most guidance comes from third-party how-to guides.
The current Sablier product handles vesting, payroll and airdrops through a newer app. The legacy deployment exists so people with older streams are not locked out.
6 features
Key features
01
Recipient interface
The site is a recipient-facing interface for streams created under the original Sablier contracts. It is meant for withdrawing, not for setting up new payments.
02
Token streaming
Sablier's core idea is that tokens become claimable over time rather than in one lump sum. This supports vesting schedules and salary-style payouts.
03
Seven-chain coverage
The listing shows deployments on Ethereum, Polygon, BNB Chain, Arbitrum, Ronin, Optimism and Avalanche, so older streams can sit on any of these networks.
04
Long-running protocol
The protocol dates to 2019, making it one of the earlier token streaming systems. The legacy site keeps that history accessible.
05
Part of the wider Sablier suite
The Sablier project positions itself as infrastructure for onchain token distribution, used by DAOs and businesses for vesting, payroll and airdrops.
06
No token required
There is no native token attached to this product, so using it does not require holding anything besides the stream's own asset and gas.
Pros and cons
What we like
- Keeps access to older streams open for recipients who already have funds there
- Originates from a protocol first released in 2019, so it has a long operating history
- Deployed across seven networks, covering most major EVM ecosystems
- Two audits are recorded in the listing
- No native token, so no extra asset is needed beyond the streamed token and gas
- Non-custodial design: recipients withdraw directly from contracts with their own wallet
Watch out for
- It is a legacy product, so new features and active development are focused on the current Sablier app instead
- The homepage gives almost no on-page guidance, so first-time recipients may need outside how-to guides
- Fees, gas costs and any protocol charges are not published on the page
- Team, governance and audit details are not spelled out on the page, only that two audits are listed in a directory
- Smart-contract risk remains for older contracts, which cannot simply be upgraded
- Spans several chains, so users must know which network their stream is on
Sablier Legacy fees
The legacy recipient page does not publish a fee schedule. Users would normally see network gas costs in their wallet when they withdraw from a stream, and any protocol-level charges would show in the transaction details.
Some current Sablier airdrop campaign pages show a small claim fee, but that belongs to the newer app and should not be assumed to apply here. Check your wallet's confirmation screen before signing.
Is Sablier Legacy safe?
The listing records two audits for the Sablier legacy contracts, but the page does not publish the auditors or reports. Streams are held in smart contracts rather than by a company, so the main risks are contract bugs and phishing rather than counterparty failure. The 2019 contracts are older than much of today's tooling.
The main practical risk for users is fake sites. Reach the recipient page from a source you trust, check the address, and never share a seed phrase. Team, legal entity and regulatory status are not stated on the page.
6 steps
How to get started with Sablier Legacy
- 1
Confirm which network and wallet address your stream was created for, using the sender's message or your wallet history.
- 2
Open the official legacy recipient site and make sure the address matches the one your project or sender gave you.
- 3
Connect the wallet that receives the stream and switch to the correct network.
- 4
Find your stream in the list and check the balance that has become available.
- 5
Start a withdrawal and review the gas estimate and token amount in your wallet.
- 6
Approve the transaction and confirm the tokens arrived. If you plan new streams or vesting, use the current Sablier app instead.
Who Sablier Legacy is for
This page is for recipients who already hold streams under the original Sablier contracts, such as people vested by a DAO or paid by a project that used the early version. It is not aimed at teams wanting to create new payment streams or airdrops.
Sablier Legacy FAQs
What is Sablier Legacy?
It is the legacy version of Sablier, a token streaming and distribution protocol first released in 2019. The Recipient site lets people who were receiving streams under the old contracts view and withdraw what they are owed.
How is Sablier Legacy different from the current Sablier?
The page's own description calls it the legacy version of Sablier Lockup, and the tracked listing describes it as a version released in 2019. New streams, vesting and airdrops are handled through the current Sablier app, which is a separate product.
Which blockchains does Sablier Legacy support?
The listing shows deployments on Ethereum, Polygon, BNB Chain, Arbitrum, Ronin, Optimism and Avalanche. You need to connect to the network where your stream was created.
Does Sablier Legacy have its own token?
No. The listing shows no native token for Sablier Legacy, so there is nothing to buy or stake to use it. Streams pay out in whatever token the sender chose.
What does it cost to use?
The page does not publish a fee schedule. You should expect to pay normal network gas for withdrawals, and you should check your wallet's confirmation screen before approving anything.
Is Sablier Legacy safe?
The listing shows about $516,000 in total value locked, with two audits recorded. Audits reduce but do not remove smart-contract risk, and older contracts carry their own risks, so withdrawing owed funds and using only the official address is sensible.
Compare
Sablier Legacy alternatives
Streamflow is a Solana-focused platform for on-chain token vesting, airdrops, staking and locks, aimed at token teams, DAOs and developers.
Superfluid is a money streaming protocol that sends tokens by the second across ten chains, aimed at DAOs, builders and users of streaming apps.
Sablier Lockup is an audited onchain protocol for token vesting, payroll, grants and airdrops, aimed at DAOs and businesses across many chains.
LlamaPay is a multi-chain protocol that streams crypto payments by the second for DAOs, teams and contractors paid in stablecoins.
Lightning Network is a Bitcoin layer-2 payment channel network for fast, low-fee payments, suited to micropayments and users who want non-custodial transfers.
Pay Protocol is a non-custodial, keyless crypto payment and wallet infrastructure for B2C businesses, running on Tron, BNB Chain and Ethereum.
Same category
More Payments dApps
Wise is an international account and money transfer service for sending, holding and spending money in many currencies, not a crypto product.
Fungies is a Merchant of Record platform that handles payments, checkout and VAT or sales tax for sellers of SaaS, games and digital products.
Telcoin is a mobile wallet, remittance service and Nebraska-chartered digital asset bank built around the TEL token and multi-currency stablecoins.
Sablier Flow is an onchain payment tool that streams tokens at a constant per-second rate, with senders topping up over time, for DAOs and businesses.
PagCrypto (PagFinance) lets users pay Brazilian PIX and boletos from a self-custody crypto wallet, for 1% to 2% plus a minimum fee, with KYC required.
Pulsar Money is a stablecoin-funded app with USD and EUR balances, a virtual card, swaps and an Earn feature for global spending.
Same chain
More on Ethereum
Lido is a liquid staking protocol where users stake ETH and receive stETH, a reward-earning token usable across DeFi, governed by LDO holders.
Aave V3 is a non-custodial DeFi lending protocol on 21 chains where users earn interest on deposits or borrow against collateral.
Uniswap V4 is the latest Uniswap DEX version with hooks and concentrated liquidity, running on 22 chains for self-custody token swaps and liquidity provision.
Uniswap V3 is a non-custodial decentralized exchange protocol for token swaps and concentrated liquidity provision across 40+ chains.
DeFi Saver is a non-custodial tool for managing and automating leveraged lending positions across major DeFi protocols on Ethereum and layer-2 networks.
OKX is a major centralized crypto exchange for spot and derivatives trading, earn products and a Web3 wallet, with its own OKB token.
How we checked
Sources
- 1.defillama.com/protocol/sablier-legacy
- 2.medium.com/@Weave_Crypto/weaves-how-to-guide-sablier-vesting-and-claiming-89ed3e877237
Last updated . Spotted an error? Tell us and we will correct it.