Cross Chain Bridge · Review
Multichain Review 2026: Bridge Design and Risks
Multichain is a cross-chain protocol described in documentation that is now several years old. It explains token transfers, cross-chain calls, and NFT bridging, but current service availability is unclear.
By the DappsAtlas editorial team · Updated
DappsAtlas score
4.5/10
Weak
Our verdict on Maxylab Multichain
4.5/10Multichain's documentation outlines a broad cross-chain toolkit: token bridges, a router, contract calls, and NFT transfers. The main strength is the range of mechanisms described, including liquidity-based routing and multi-node signing. The central caveat is that the documentation is three years old and does not confirm current availability, fees, audits, or operators. Readers should treat the service as unverified until they can confirm that the specific route is live and understand its risks.
Score breakdown
How Maxylab Multichain scores
- Security
- 3.0/10
- Ease of use
- 5.0/10
- Fees
- n/a
- Features
- 7.0/10
Scores run from 0 to 10 and are based only on facts we could verify. Where information was missing we mark the score n/a rather than guess.
What is Maxylab Multichain?
Multichain, originally called Anyswap, is described as infrastructure for moving assets and data between blockchains. Its documentation covers token bridges, a liquidity-based router, cross-chain contract calls through anyCall, and NFT transfers.
The documented bridge model locks tokens on one chain and issues wrapped tokens on another. The router is described as using liquidity pools and bridged assets to support routes across multiple chains. The documentation names Ethereum, Binance Smart Chain, Polygon, Moonbeam, Litecoin, and Terra among examples, but does not establish which networks are supported now.
The documentation was last updated three years ago. Current service availability, fees, supported routes, audit details, and the identity of current MPC operators are not established.
How Maxylab Multichain works
Multichain documentation describes two ways to move tokens. Its bridge locks an asset in a smart contract on the source chain and mints a corresponding wrapped asset on the destination chain. To return the asset, the wrapped token is burned and the original is released. The router is described as using liquidity pools for assets already present on multiple chains, as well as supporting bridged assets for transfers across more than two chains.
The documentation also describes an MPC network: multiple nodes jointly sign transactions, while no single node holds the complete key. The anyCall feature uses this network for cross-chain contract calls, and the protocol describes NFT bridging and routing for ERC-721 and ERC-1155 tokens. These are descriptions of the system, not confirmation that its services or routes are currently available.
4 features
Key features
01
Token bridge
The documentation describes locking an asset in a source-chain contract and minting a corresponding wrapped asset on the destination chain. Redeeming burns the wrapped asset and releases the original.
02
Cross-chain router
The router is described as moving assets between multiple chains, using liquidity pools for existing assets or supporting bridged assets.
03
Cross-chain calls
The anyCall feature is described as enabling projects to trigger smart-contract calls across chains, with transactions signed by the MPC network.
04
NFT transfers
The documentation describes bridging and routing for NFTs using the ERC-721 and ERC-1155 standards.
Pros and cons
What we like
- The documentation explains distinct bridge and router approaches rather than presenting them as the same mechanism.
- The described router can use liquidity pools as well as bridged assets.
- The protocol documentation includes cross-chain contract calls and NFT transfers alongside token bridging.
- The described MPC design distributes transaction signing across multiple nodes rather than relying on one complete key.
Watch out for
- The documentation was last updated three years ago, so it does not confirm which services or chains are currently operating.
- The documentation does not state bridge fees, router fees, or other transaction charges.
- The described bridges rely on MPC signing and smart contracts, creating risks from key coordination failures, contract bugs, or insufficient liquidity.
- The documentation does not identify audit reports or provide current details about the MPC node operators.
- Wrapped assets depend on the bridge's ability to release or redeem the corresponding assets.
Maxylab Multichain fees
Multichain does not publish fees in the documentation. Before signing, users would need to check the transfer interface for any bridge or router charges, liquidity-related pricing, and destination-chain gas costs. Current interface availability is unclear.
Is Maxylab Multichain safe?
The documentation describes an MPC network in which nodes jointly sign transactions, and says the code is open source. It does not identify audit reports, name current node operators, or establish the present security and operational status of the network.
Bridge users face smart-contract and signing risks, as well as the risk that wrapped assets cannot be redeemed for the locked originals. Router transfers may also depend on available liquidity. Because the documentation was last updated three years ago, verify that the service and route are active before interacting with it.
5 steps
How to get started with Maxylab Multichain
- 1
Check whether the Multichain service and the chain pair you need are currently operating.
- 2
Open the transfer interface, if available, and connect a compatible wallet.
- 3
Choose the source and destination chains, then select the token or NFT route.
- 4
Review the route, any displayed charges, and the destination-chain gas requirements.
- 5
Approve the token or NFT transfer if required, then submit the transaction and verify its status on both chains.
Who Maxylab Multichain is for
Multichain may interest developers researching cross-chain infrastructure or users comparing bridge designs. It is not a good fit for anyone who cannot independently verify that a service and route are currently live, review the displayed costs, and accept the risks of wrapped assets, smart contracts, MPC signing, and cross-chain liquidity.
Maxylab Multichain FAQs
What is Multichain?
Multichain documentation describes bridges that lock tokens on one chain and issue corresponding wrapped tokens on another. Its router is described as supporting transfers between multiple chains using liquidity pools or bridged assets. The documentation is several years old, so current availability should not be assumed.
How does the Multichain bridge work?
The documentation describes an MPC network whose nodes jointly sign transactions, with no single node holding the full signing key. This design does not remove smart-contract, coordination, or asset-backing risks. The documentation does not identify audit reports or current node operators.
What fees does Multichain charge?
The documentation does not publish current fees. Before starting any transfer, check the interface for bridge or router charges, liquidity-related pricing, and the destination chain's gas cost.
Can Multichain bridge NFTs?
The documentation describes a bridge and router for ERC-721 and ERC-1155 NFTs. It does not confirm whether these services are currently operating.
Is Multichain still active?
The documentation was last updated three years ago and does not establish the current status of the bridge or supported networks. Treat current availability as unconfirmed and do not send assets unless you can verify that the service and the relevant route are active.
Compare
Maxylab Multichain alternatives
Across is an intent-based cross-chain bridge and swap protocol for moving tokens between Ethereum, rollups and other chains, with an API for apps.
NEAR Intents is a cross-chain swap engine where market makers compete on price, offered to users through the near.com multichain account.
Symbiosis is a cross-chain swap and bridge protocol routing trades across 50+ networks, including Bitcoin, Solana and TON, for DeFi users and developers.
Hyperlane is a permissionless interoperability protocol and bridge for sending tokens and data across 150+ chains, aimed at builders and bridge users.
Stargate V2 is a LayerZero-powered cross-chain bridge for moving USDC, USDT, ETH, BTC and OFTs across many chains, aimed at DeFi users and liquidity providers.
Meson is a cross-chain swap protocol for moving stablecoins and major assets between 40+ blockchains using HTLCs and pre-deposited liquidity.
Same category
More Cross Chain Bridges
Axelar is a proof-of-stake network that connects blockchains for token transfers and messaging, aimed at developers, token issuers and institutions.
Wormhole is a cross-chain messaging and bridge protocol linking over 40 blockchains, with the W governance token, for DeFi users and multichain developers.
Rhino.fi, formerly DeversiFi, is a cross-chain bridge and stablecoin settlement platform for users and fintechs across 30+ blockchains.
Stargate V1 is a LayerZero-based cross-chain bridge that moves native assets between chains through unified liquidity pools, for DeFi users and dApps.
Maya Protocol is a THORChain fork that lets users swap native assets across chains such as Bitcoin, Ethereum and Zcash, without wrapping or KYC.
Mayan is a cross-chain swap and bridging protocol with an SDK, using intent-based routing, for users and wallets moving assets between chains.
Same chain
More on Ethereum
Lido is a liquid staking protocol where users stake ETH and receive stETH, a reward-earning token usable across DeFi, governed by LDO holders.
Aave V3 is a non-custodial DeFi lending protocol on 21 chains where users earn interest on deposits or borrow against collateral.
Uniswap V4 is the latest Uniswap DEX version with hooks and concentrated liquidity, running on 22 chains for self-custody token swaps and liquidity provision.
Uniswap V3 is a non-custodial decentralized exchange protocol for token swaps and concentrated liquidity provision across 40+ chains.
DeFi Saver is a non-custodial tool for managing and automating leveraged lending positions across major DeFi protocols on Ethereum and layer-2 networks.
OKX is a major centralized crypto exchange for spot and derivatives trading, earn products and a Web3 wallet, with its own OKB token.
How we checked
Sources
No public sources were recorded for this review.
Last updated . Spotted an error? Tell us and we will correct it.