Skip to content

DappsAtlas index · 14,224 dApps

DappsAtlas
ChainPort logo

Bridge · Review

Active

ChainPort Review 2026: A Small Bridge Across Five Chains

ChainPort is a cross-chain bridge for moving tokens between Ethereum, BNB Chain, Polygon, Fantom and Cardano. It has a simple interface, but its TVL is small and key details such as fees are not published.

By the DappsAtlas editorial team · Updated

DappsAtlas score

5.8/10

Mixed

Our verdict on ChainPort

5.8/10

ChainPort suits users who need to move tokens between Ethereum, BNB Chain, Polygon, Fantom or Cardano and want a simple bridge form. Its main strength is a focused interface and coverage that includes Cardano. The main caveat is the lack of published detail: fees, mechanism and audit specifics are not in the sources, and TVL is small at about $440K. Start with a small test transfer and keep exposure limited.

Score breakdown

How ChainPort scores

Security
5.5/10
Ease of use
7.0/10
Fees
n/a
Features
5.0/10

Scores run from 0 to 10 and are based only on facts we could verify. Where information was missing we mark the score n/a rather than guess.

What is ChainPort?

ChainPort is a cross-chain bridge that lets users move tokens between blockchains. DefiLlama describes it as a secure bridge for hopping across blockchains at a click, and lists it under the Bridge category since December 2021.

DefiLlama shows it on Ethereum, Cardano, BNB Chain, Polygon and Fantom. Cardano is a non-EVM chain, which is less common among bridges. The project has a token, PORTX, and two audits are listed.

The app itself is minimal. The homepage shows Port, Earn and Stats sections, and a Port form with source and target asset fields and a Connect Wallet button. TVL is about $440K, down 21.6% over seven days, so liquidity is limited.

How ChainPort works

A bridge lets you use assets on a blockchain other than the one where they started. Blockchains cannot read each other directly, so a bridge uses locked, minted or pooled assets plus some form of verification to represent your tokens on the destination chain.

With ChainPort you choose a token and a source network, then choose a destination network. The app is built around that flow, with a Port screen, an Earn section and a Stats page. The project does not state the exact mechanism, such as whether it uses lock-and-mint or liquidity pools, so this review does not describe it.

TVL on a bridge is the value of assets it holds in its contracts. For ChainPort, DefiLlama shows about $440,468, which is small compared with major bridges.

6 features

Key features

01

Cross-chain token porting

The main screen has source and target asset selectors, amount fields and a wallet connect button for moving tokens between supported networks.

02

Five listed chains

DefiLlama lists Ethereum, BNB Chain, Polygon, Fantom and Cardano, a mix of EVM networks plus one non-EVM chain.

03

Earn section

The app has an Earn section next to the bridge. The project does not describe how it works.

04

Stats page

A Stats page is part of the navigation. The project does not describe what it shows.

05

Audits listed

DefiLlama records two audits for the project. The project does not name the auditors.

06

PORTX token

The project has a token, PORTX, according to DefiLlama. Its utility is not described publicly.

Pros and cons

What we like

  • Simple, single-purpose interface with clear From and To selectors
  • Covers five networks, including Cardano alongside EVM chains
  • Listed on DefiLlama since December 2021, so it has a multi-year presence
  • Two audits are recorded on DefiLlama
  • Has Earn and Stats sections beyond the basic bridge form

Watch out for

  • Fees are not published in the sources reviewed, so the cost of a transfer is unknown until you use the app
  • TVL is small at about $440K, and it fell 21.6% over seven days, which suggests limited liquidity
  • Only two audits are listed, and the auditors, scope and dates are not given publicly
  • Bridges are a frequent target for exploits, and this one adds smart-contract and operator risk
  • Supported chains and assets are visible only after connecting a wallet, so coverage is hard to check beforehand

ChainPort fees

ChainPort's fees are not published in the sources reviewed. Its homepage shows only amount fields and a wallet connect button, with no fee table.

On most bridges, the total cost is the network gas on the source chain plus any bridge or service charge, and sometimes a gas cost on the destination chain. Users would expect to see a quote in the app after connecting a wallet and entering an amount. Check it before confirming.

Is ChainPort safe?

DefiLlama lists two audits for ChainPort, but the project does not name the auditors or give dates and findings. Treat the audit count as a small positive rather than a guarantee. Bridges hold pooled funds and rely on contract logic and often off-chain operators, so a single failure can affect all users.

Public sources give no information on custody design, governance, insurance or past incidents. TVL is small and recently fell 21.6%, which can mean thin liquidity for larger transfers. Use small test transfers, verify the app address, and never approve unlimited token spending unless you understand the risk.

6 steps

How to get started with ChainPort

  1. 1

    Confirm you are on the official ChainPort app address and bookmark it to avoid lookalike sites.

  2. 2

    Connect a compatible wallet for the source network, such as an EVM wallet for Ethereum, BNB Chain, Polygon or Fantom.

  3. 3

    Pick the asset and source network in the From box, then pick the destination network in the To box.

  4. 4

    Enter a small test amount first and read the quoted fees and expected output.

  5. 5

    Confirm the transaction in your wallet and wait for the transfer to complete on the destination chain.

  6. 6

    Check the received tokens in your wallet, adding the token contract manually if it does not appear.

Who ChainPort is for

ChainPort is for users who already hold tokens on one of the five listed networks and want to move them to another without a centralized exchange. It suits people comfortable with wallet connections and bridge risk. It is a weaker fit for large transfers, where thin liquidity and limited public detail matter more.

ChainPort FAQs

What is ChainPort?

ChainPort is a cross-chain bridge. You connect a wallet, choose an asset and a source network, choose a target network, and move the tokens across. DefiLlama lists it as a bridge and describes it as a secure bridge for hopping across blockchains.

Which blockchains does ChainPort support?

DefiLlama lists Ethereum, Cardano, BNB Chain, Polygon and Fantom. The app may support more assets or routes than this, but public sources reviewed do not say, so check the in-app selectors.

Is ChainPort safe?

DefiLlama shows two audits for ChainPort but gives no details on who did them or what they covered. An audit lowers risk but does not remove it, and bridges have been exploited before. Only move amounts you can afford to lose.

Does ChainPort have a token?

Public sources list PORTX as the token tied to the project. They do not say what the token does, so check the project's own documentation for its role before buying it.

How much does ChainPort charge?

The sources reviewed do not publish a fee schedule. Bridge costs usually combine network gas fees and any service fee, and the app would normally show a quote before you confirm a transfer.

What is the Earn tab on ChainPort?

The homepage shows an Earn section alongside Port and Stats. The project does not explain how Earn works, so read the app's own description and the risks before committing funds.

Compare

ChainPort alternatives

All alternatives
LayerZero V2 logoScore 8.0 out of 10

LayerZero V2 is a cross-chain messaging protocol and bridge infrastructure for developers and asset issuers, connecting dozens of blockchains.

TVL $16.7B+8.9%Polygon · Ethereum · ApeChain +76
CCIP logo

CCIP

Bridge

Score 7.6 out of 10

Chainlink CCIP is a cross-chain messaging and token-transfer protocol for developers, token issuers and institutions, with about $1.89B TVL on 21 chains.

TVL $1.85B−2.7%Ethereum · Solana · Avalanche +17
Unit logo

Unit

Bridge

Score 7.2 out of 10

Unit is the asset tokenization layer on Hyperliquid, letting users deposit and withdraw native assets like BTC, ETH and SOL.

TVL $936M−1.3%Bitcoin · Zcash · Ethereum +5
USDT0 logo

USDT0

Bridge

Score 7.5 out of 10

USDT0 is Tether's omnichain system that puts USDT and tokenized gold (XAUT0) on 25+ blockchains, for users and protocols needing unified stablecoin liquidity.

TVL $3.30B+7.0%Ethereum · Arbitrum · Avalanche +26
cBridge logo

cBridge

Bridge

Score 7.3 out of 10

cBridge is Celer Network's multi-chain bridge for moving tokens across Ethereum, layer-2s and sidechains, for DeFi users who bridge between many networks.

TVL $11.6M−4.0%Ethereum · BNB Chain · Polygon +23
Coinbase Bridge logoScore 6.5 out of 10

Coinbase Bridge is a set of Coinbase-issued wrapped tokens backed 1:1 by held assets, covering Bitcoin, XRP, Cardano, Dogecoin and Litecoin.

TVL $7.60B−2.5%Bitcoin · XRP Ledger · Cardano +2

Same category

More Bridges

Bridge rankings
Hyperliquid Bridge logoScore 7.2 out of 10

Hyperliquid Bridge moves USDC from Arbitrum onto the Hyperliquid Layer 1 for traders using its perpetual and spot markets.

TVL $6.41B−2.9%Hyperliquid L1 · Arbitrum
Lombard BTC.b logoScore 7.1 out of 10

Lombard BTC.b is a 1:1 Bitcoin representation for moving BTC across several chains in DeFi, secured by a validator consortium and redeemable for native BTC.

TVL $161M−0.6%Bitcoin
Wan Bridge logoScore 7.0 out of 10

Wan Bridge is Wanchain's cross-chain bridge, linking over 30 networks including Bitcoin, XRPL, Ethereum and Solana, for users moving assets across chains.

TVL $5.56M−13.1%XRP Ledger · Ethereum · BNB Chain +28
Stacks sBTC logoScore 6.8 out of 10

sBTC is a SIP-010 token on Stacks pegged 1:1 to Bitcoin, for BTC holders who want to use their Bitcoin in DeFi and smart contracts.

TVL $187M−3.8%Bitcoin
FAssets logo

FAssets

Bridge

Score 6.8 out of 10

FAssets is an over-collateralized bridge on Flare that lets XRP, BTC and DOGE holders mint wrapped tokens to use in DeFi.

TVL $180M−6.1%XRP Ledger · Flare
BOB Bridge logoScore 6.8 out of 10

BOB is a Bitcoin-focused EVM hybrid L2 with a Gateway for native BTC swaps, bridging and DeFi, aimed at Bitcoin holders and developers.

TVL $2.36M−3.1%Ethereum

Same chain

More on Ethereum

Ethereum rankings
Lido logo

Lido

Staking Pool

Score 8.6 out of 10

Lido is a liquid staking protocol where users stake ETH and receive stETH, a reward-earning token usable across DeFi, governed by LDO holders.

TVL $21.7B−0.8%Ethereum · Solana · Terra +2
Aave V3 logo

Aave V3

Lending

Score 8.6 out of 10

Aave V3 is a non-custodial DeFi lending protocol on 21 chains where users earn interest on deposits or borrow against collateral.

TVL $15.1B+1.9%Ethereum · Base · Arbitrum +18
Uniswap V4 logoScore 8.5 out of 10

Uniswap V4 is the latest Uniswap DEX version with hooks and concentrated liquidity, running on 22 chains for self-custody token swaps and liquidity provision.

TVL $1.14B−2.9%Ethereum · Robinhood Chain · Base +19
Uniswap V3 logoScore 8.4 out of 10

Uniswap V3 is a non-custodial decentralized exchange protocol for token swaps and concentrated liquidity provision across 40+ chains.

TVL $1.51B−3.7%Ethereum · Base · Arbitrum +38
Defi Saver Asset Management logoScore 8.1 out of 10

DeFi Saver is a non-custodial tool for managing and automating leveraged lending positions across major DeFi protocols on Ethereum and layer-2 networks.

TVL $342M−4.7%Ethereum · Arbitrum · Optimism +1
OKX logo

OKX

Centralized Exchanges

Score 8.0 out of 10

OKX is a major centralized crypto exchange for spot and derivatives trading, earn products and a Web3 wallet, with its own OKB token.

TVL $28.4B−0.7%Ethereum · Bitcoin · X Layer +21

How we checked

Sources

  1. 1.defillama.com/protocol/chainport

Last updated . Spotted an error? Tell us and we will correct it.