Cross Chain Bridge · Review
ActiveAllbridge Review 2026: Cross-Chain Stablecoin Bridge and Its Risks
Allbridge is a cross-chain bridge, and its Core product focuses on native stablecoin transfers between EVM and non-EVM chains. It has real volume, but also a record of exploits and a 2026 pause.
By the DappsAtlas editorial team · Updated
DappsAtlas score
5.8/10
Mixed
Our verdict on Allbridge
5.8/10Allbridge suits users who need to move stablecoins between chains, especially to or from non-EVM networks like Solana or Tron, and who accept bridge risk. Its main strength is a stablecoin-focused design that uses the assets' official cross-chain standards, with a reported 0.1% fee on Next. The main caveat is its security history: a 2023 exploit and a July 2026 pause after a reported $1.65M incident. Confirm the current status, start with small transfers, and avoid parking large sums in the bridge.
Score breakdown
How Allbridge scores
- Security
- 4.0/10
- Ease of use
- 7.5/10
- Fees
- 6.0/10
- Features
- 7.0/10
Scores run from 0 to 10 and are based only on facts we could verify. Where information was missing we mark the score n/a rather than guess.
What is Allbridge?
Allbridge is a cross-chain bridge protocol. Its pitch is a simple way to transfer assets between blockchains, covering tokens such as ERC20 and SPL. Its Core product narrows the focus to stablecoins, linking EVM and non-EVM chains.
One review site reports that Allbridge connects 28 chains, including Ethereum, Solana and Tron. Public reporting also describe Core users as having bridged more than $1.7B between Ethereum and other chains, which points to real usage.
The security record matters more than most features. In April 2023 the bridge was reportedly exploited for about 283,000 BUSD and 291,000 USDT. In July 2026, Allbridge Core said it paused the protocol as a precaution after a security incident reported at around $1.65M. The material reviewed does not say whether the bridge has fully resumed.
The homepage could not be loaded for this review, so details such as audits, team and governance are not confirmed here.
How Allbridge works
A bridge lets you move value from one blockchain to another. You send a token on the source chain and receive an equivalent on the destination chain. Different bridges do this in different ways: some lock tokens and issue wrapped copies, some use liquidity pools on each side.
Allbridge Core is described as enabling native stablecoin transfers by building on the official cross-chain standards of the assets it supports. One review names CCTP and OFT as the routing options, which means the issuer-backed or messaging-standard route is used where available instead of a bridge-minted token.
The broader Allbridge token bridge is described as a way to move assets such as ERC20 and SPL tokens across chains in a few clicks. The exact mechanics per route, including pool design and validator setup, are not detailed in the material reviewed.
6 features
Key features
01
Native stablecoin bridging
Allbridge Core is built for moving stablecoins between chains. It relies on the official cross-chain standards of the assets it handles.
02
EVM and non-EVM coverage
The Core product bridges between EVM and non-EVM networks. One review puts the total at 28 chains, including Ethereum, Solana and Tron.
03
CCTP and OFT routing
One review mentions CCTP and OFT routing, which are standards from the token issuers and messaging layers rather than a custom wrapped token.
04
Broader token bridge
Allbridge also describes a general token bridge for assets such as ERC20 and SPL tokens, with transfers in a few clicks.
05
0.1% fee on Next
One review reports a 0.1% fee on the Next product, a flat percentage that is simple to read when quoted.
06
Public volume data
Daily transfer volume through the protocol is tracked publicly, and users are reported to have bridged more than $1.7B between Ethereum and other chains.
Pros and cons
What we like
- Focus on native stablecoin transfers that use the issuers' official cross-chain standards
- Covers both EVM and non-EVM networks, with one review counting 28 chains
- Reported 0.1% fee on Allbridge Next is easy to understand
- Substantial usage, with over $1.7B reported bridged between Ethereum and other chains
- The team paused the protocol as a precaution after the 2026 incident rather than leaving it running
Watch out for
- Two reported security incidents: about $574,000 drained in 2023 and a precautionary pause in July 2026 after a reported $1.65M incident
- Bridges carry smart-contract risk, and funds in transit or in liquidity pools can be lost in an exploit
- Full fee schedule, audit reports and team details are not published in the material reviewed
- Only a single source reports the 0.1% fee, and it applies to the Next product specifically
- The project does not say whether the protocol resumed normal operation after the 2026 pause
Allbridge fees
One review reports a 0.1% fee on Allbridge Next. The material reviewed does not publish a full fee table for Allbridge Core, the token bridge, or any liquidity-pool charges.
You will also pay network gas on the source chain and possibly the destination chain. The quote shown in the bridge interface before you confirm a transfer is the place to see your exact cost.
Is Allbridge safe?
Bridges hold or route large pools of value, which makes them frequent exploit targets. Allbridge has two reported incidents: roughly $574,000 lost in April 2023, and a July 2026 pause after a reported $1.65M security incident. Two incidents in a few years is a meaningful red flag for anyone moving sizeable amounts.
Audit reports, bug bounty terms and the exact custody and validator model are not published in the material reviewed. Use small amounts, confirm the bridge is operating through official channels, and do not leave funds in transit or in pools longer than needed. Do not treat any bridge as insured against loss.
6 steps
How to get started with Allbridge
- 1
Check the project's official channels to confirm the bridge is currently running after the July 2026 pause.
- 2
Install a wallet that supports your source chain, such as an EVM wallet or a Solana wallet, and make sure you can reach the destination chain too.
- 3
Fund the wallet with the stablecoin you want to move plus enough native token for gas on the source chain.
- 4
Open the bridge, choose the source chain, destination chain and token, and enter a small test amount first.
- 5
Review the quoted fee, estimated time and received amount, then confirm the transaction in your wallet.
- 6
Wait for the transfer to complete and confirm the funds arrived at the destination address before bridging larger amounts.
Who Allbridge is for
Allbridge is for crypto users who regularly move stablecoins across chains, including between EVM and non-EVM networks, and who understand bridge risk. It is less suited to anyone who wants a bridge with a long, clean security record or fully published audits and fee tables.
Allbridge FAQs
What is Allbridge?
Allbridge is a protocol for moving tokens between blockchains. Its Core product focuses on stablecoins and covers both EVM and non-EVM networks such as Ethereum, Solana and Tron.
Which blockchains does Allbridge support?
One review site reports that Allbridge connects 28 chains, including Ethereum, Solana and Tron. Check the app's chain selector for the current list, since supported networks change over time.
How does Allbridge Core move stablecoins?
Allbridge Core uses the official cross-chain standards of the assets it moves, rather than issuing its own wrapped copies. One review names CCTP and OFT as the routing options.
What does Allbridge cost?
The same review reports a 0.1% fee on the Allbridge Next product. Other fees, such as gas and any pool or route charges, are not published in the material reviewed, so check the quote screen before you confirm.
Has Allbridge been hacked?
Allbridge has had incidents. In April 2023 the bridge was reportedly exploited for roughly $574,000 in BUSD and USDT, and in July 2026 Allbridge Core paused its protocol after a reported $1.65M security incident. No bridge is risk-free, so avoid moving more than you can afford to lose.
Is Allbridge working after the 2026 pause?
Public sources reviewed show the pause was announced as a precaution. They do not confirm when or whether operations resumed, so check the project's official channels for current status before sending funds.
How much volume has Allbridge handled?
Public reporting describes Allbridge Core as having bridged over $1.7B in volume between Ethereum and other chains. The project's current total value locked is not given in the material reviewed.
Compare
Allbridge alternatives
Across is an intent-based cross-chain bridge and swap protocol for moving tokens between Ethereum, rollups and other chains, with an API for apps.
NEAR Intents is a cross-chain swap engine where market makers compete on price, offered to users through the near.com multichain account.
Symbiosis is a cross-chain swap and bridge protocol routing trades across 50+ networks, including Bitcoin, Solana and TON, for DeFi users and developers.
Hyperlane is a permissionless interoperability protocol and bridge for sending tokens and data across 150+ chains, aimed at builders and bridge users.
Stargate V2 is a LayerZero-powered cross-chain bridge for moving USDC, USDT, ETH, BTC and OFTs across many chains, aimed at DeFi users and liquidity providers.
Meson is a cross-chain swap protocol for moving stablecoins and major assets between 40+ blockchains using HTLCs and pre-deposited liquidity.
Same category
More Cross Chain Bridges
Axelar is a proof-of-stake network that connects blockchains for token transfers and messaging, aimed at developers, token issuers and institutions.
Wormhole is a cross-chain messaging and bridge protocol linking over 40 blockchains, with the W governance token, for DeFi users and multichain developers.
Rhino.fi, formerly DeversiFi, is a cross-chain bridge and stablecoin settlement platform for users and fintechs across 30+ blockchains.
Stargate V1 is a LayerZero-based cross-chain bridge that moves native assets between chains through unified liquidity pools, for DeFi users and dApps.
Maya Protocol is a THORChain fork that lets users swap native assets across chains such as Bitcoin, Ethereum and Zcash, without wrapping or KYC.
Mayan is a cross-chain swap and bridging protocol with an SDK, using intent-based routing, for users and wallets moving assets between chains.
Same chain
More on Ethereum
Lido is a liquid staking protocol where users stake ETH and receive stETH, a reward-earning token usable across DeFi, governed by LDO holders.
Aave V3 is a non-custodial DeFi lending protocol on 21 chains where users earn interest on deposits or borrow against collateral.
Uniswap V4 is the latest Uniswap DEX version with hooks and concentrated liquidity, running on 22 chains for self-custody token swaps and liquidity provision.
Uniswap V3 is a non-custodial decentralized exchange protocol for token swaps and concentrated liquidity provision across 40+ chains.
DeFi Saver is a non-custodial tool for managing and automating leveraged lending positions across major DeFi protocols on Ethereum and layer-2 networks.
OKX is a major centralized crypto exchange for spot and derivatives trading, earn products and a Web3 wallet, with its own OKB token.
How we checked
Sources
No public sources were recorded for this review.
Last updated . Spotted an error? Tell us and we will correct it.