Active

Stakingverse Review 2026: ETH and LYX Liquid Staking

Stakingverse is a non-custodial liquid staking service for ETH on Ethereum and LYX on LUKSO, with node setup help for people who run their own validators. It is a small, focused provider whose fees are not published on its homepage.

By the DappsAtlas editorial team · Updated Nov 5, 2026

DappsAtlas score

6.9/10

Good

Visit Stakingverse

Our verdict on Stakingverse

6.9/10

Stakingverse suits holders of ETH or LYX who want non-custodial liquid staking, and operators who want guidance setting up their own validator. Its main strength is the focus on LUKSO alongside Ethereum, with a clear keys-stay-yours approach and listed audits. The main caveat is size and transparency on cost: total value locked is under $5M and the homepage does not state fees or commission. Check the audit reports and pool terms before depositing.

Score breakdown

How Stakingverse scores

Security: 6.5/10
Ease of use: 7.5/10
Fees: n/a
Features: 6.5/10

Scores run from 0 to 10 and are based only on facts we could verify. Where information was missing we mark the score n/a rather than guess.

What is Stakingverse?

Stakingverse is a staking provider that offers non-custodial liquid staking for ETH on Ethereum and LYX on LUKSO. It also sells setup, management and support services for people who run their own validators at home or in the cloud. The site is run under the Sigmatic name, per the footer.

The project is small. Its homepage shows total value locked of about $4.72M, with roughly $3.99M in ETH staking and $730K in LYX staking. Its listing with a DeFi tracker dates from April 2025, and two audits are recorded there.

The pitch is control and simplicity: keep your keys, put assets to work, and use experienced operators. It is most notable as one of the staking options in the LUKSO ecosystem, alongside its Ethereum pool.

How Stakingverse works

In proof-of-stake networks, validators lock up tokens to propose and attest to blocks and earn rewards. Running a validator needs a minimum stake and technical upkeep. Liquid staking pools deposits so smaller holders can take part, and the user typically receives a token representing the stake.

Stakingverse says its liquid staking is non-custodial, so users keep control of their keys. Experienced validator operators run the infrastructure, and rewards accrue to stakers. On LUKSO the receipt token is sLYX.

For people who want to run their own validator, Stakingverse describes a services track. It covers hardware and network planning, installing and configuring the validator, consensus and execution clients, and getting the node ready. The project states that keys and validators stay with the user.

6 features

Key features

Non-custodial staking

Users keep their own keys and wallet control while staking, rather than depositing into a custodian.

Two-network pools

Stake ETH on Ethereum and LYX on LUKSO, with pools for each network.

sLYX liquid staking

The site lists a liquid staking token, sLYX, for LUKSO staking, so staked LYX can stay usable.

Node setup services

Hardware and network planning, client installation and configuration, and help getting a validator live.

Validator architecture guidance

The site describes the validator, consensus and execution clients that make up a staking setup, and offers guidance on each.

Audits and documentation

A Security and Audits section and documentation are linked from the site, and two audits are listed.

Pros and cons

What we like

Non-custodial design keeps users in control of their keys
Covers both Ethereum and LUKSO, one of few providers focused on LYX
Offers node setup and management for users who want their own validator
Two audits are listed and a Security section is published
No native token is required to use the service

Watch out for

Total value locked is small, at roughly $4.7M, so liquidity and market depth are limited
The fee structure and reward commission are not stated on the homepage
Only two networks are supported, Ethereum and LUKSO, with no wider multichain coverage
Liquid staking carries smart-contract risk even when contracts are audited
The LUKSO pool is small, at about 15% of total value locked, and depends on the health of a young ecosystem
The team behind the project is only identified through a company name in the footer, with no further detail published on the homepage

Stakingverse fees

Stakingverse does not publish its fee or commission structure on its homepage. The homepage meta text refers to competitive APY but gives no figures.

Users should check the pool pages and documentation for any protocol commission on staking rewards, plus network gas fees when staking or withdrawing. Node service pricing is also not published, and would be quoted by the team.

Is Stakingverse safe?

Stakingverse says its staking is non-custodial and its contracts are audited. A DeFi tracker lists two audits for the project, and the site has a dedicated Security and Audits page. The names of the auditors and the findings are not given on the homepage, so readers should check that page directly.

Risks remain. Smart contracts can have bugs even after audits, and validators can be penalised for downtime or misbehaviour, which can reduce rewards. Liquid staking tokens can also trade away from the value of the underlying stake. The project is relatively small by value locked and has been tracked only since April 2025. No incidents are mentioned in the information reviewed.

6 steps

How to get started with Stakingverse

1
Decide whether to stake ETH on Ethereum or LYX on LUKSO.
2
Read the Security and Audits page and the documentation to understand the contracts and risks.
3
Connect a compatible wallet on the correct network and open the matching pool page.
4
Check the commission and withdrawal terms shown on the pool before depositing.
5
Stake a small amount first and confirm that the liquid staking token or position appears in your wallet.
6
If you want your own validator, use the contact option to ask about node services.

Open Stakingverse

Who Stakingverse is for

Stakingverse is for ETH holders who want a smaller, independent staking provider, and for LYX holders looking for a staking option in the LUKSO ecosystem. It also suits technical users who want help building and running their own validator node.

Stakingverse FAQs

What is Stakingverse?

Stakingverse is a liquid staking service. Users stake ETH on Ethereum or LYX on LUKSO and keep control of their keys, while experienced validator operators help secure the networks. It also offers setup and management help for people who want to run their own validator.

Which assets can you stake on Stakingverse?

It supports two networks: Ethereum, where users stake ETH, and LUKSO, where users stake LYX. The homepage lists a liquid staking token called sLYX for the LUKSO side.

Is Stakingverse non-custodial and safe?

The project describes its liquid staking as non-custodial, meaning users keep control of their keys. Its site lists two audits and has a Security section. Smart-contract risk and validator performance risk still exist, so users should read the audit reports before staking.

What is liquid staking on Stakingverse?

Liquid staking lets you stake assets and receive a token that represents your position, so your capital is not fully locked. The homepage names sLYX for LYX staking. It does not detail the ETH receipt token in the text reviewed here.

Can Stakingverse help me run my own validator?

Yes. It offers node services that cover hardware and network guidance, client installation and configuration, and getting a validator ready for the network. The project states that your keys and validators stay yours.

Does Stakingverse have a token?

No native token is listed for Stakingverse. The sLYX liquid staking token is tied to staked LYX rather than being a governance token.

Compare

Stakingverse alternatives

All alternatives

EigenCloud

Liquid Restaking

EigenCloud is Eigen Labs' open AI stack on Ethereum for distributed inference, verifiable agents and open research, with the EIGEN token.

TVL $5.69B−1.9%Ethereum

Renzo

Liquid Restaking

Renzo is a liquid restaking protocol on EigenLayer with vault, staking and enterprise products, for ETH holders seeking restaking yield across 13 chains.

TVL $99.9M−2.0%Ethereum · Linea · Arbitrum +10

Kelp

Liquid Restaking

Kelp is an Ethereum liquid restaking protocol that issues rsETH, for ETH holders seeking restaking rewards, hit by a bridge exploit in April 2026.

TVL $838M−4.6%Ethereum

Coinbase Wrapped Staked ETH

Liquid Restaking

Coinbase Wrapped Staked ETH (cbETH) is an ERC-20 liquid staking token on Ethereum that represents ETH staked through Coinbase.

TVL $440M−1.7%Ethereum

Mantle Restaking

Liquid Restaking

Mantle Restaking (mETH Protocol) is an Ethereum liquid staking and restaking protocol by Mantle, with a fast Aave-backed redemption route.

TVL $35.9M+0.1%Ethereum

Mellow Restaking

Liquid Restaking

Mellow Restaking is a configurable onchain vault platform for yield, aimed at institutions and DeFi depositors, with about $23.5M TVL across five chains.

TVL $21.7M−2.3%Ethereum · BNB Chain · Fraxtal +2

Same category

More Liquid Restaking dApps

Liquid Restaking rankings

Etherfi

Liquid Restaking

Ether.fi is an Ethereum liquid restaking protocol with a Visa Cash card and stablecoin, aimed at ETH holders who want yield and spending.

Ethereum

STKESOL by SOL Strategies

Liquid Restaking

STKESOL is a Solana liquid staking token from Nasdaq-listed SOL Strategies for holders who want staking rewards plus DeFi usability.

TVL $48.4M−8.8%Solana

xALGO Liquid Staking

Liquid Restaking

xALGO is Folks Finance's interest-bearing liquid staking token for Algorand, letting ALGO holders earn staking rewards while keeping a tradable token.

TVL $24.1M−1.9%Algorand