Active

Pepu Bridge Review 2026: Ethereum to Pepe Unchained V2

Pepu Bridge is the Ethereum-to-Pepe Unchained V2 bridge for the PEPU meme-coin Layer 2. It is simple but young, unaudited on record and strict about wallet compatibility.

Ethereum

By the DappsAtlas editorial team · Updated Nov 5, 2026

DappsAtlas score

4.5/10

Weak

Visit Pepu Bridge

Our verdict on Pepu Bridge

4.5/10

Pepu Bridge suits users who already hold PEPU or want to use the Pepe Unchained V2 Layer 2 and need an official route from Ethereum. Its main strength is a simple, single-purpose flow with clear wallet warnings. The main caveat is the lack of published security detail: no audits are listed, TVL is small and falling, and fees are not stated. Treat it as an early-stage bridge, test with a small amount and confirm your wallet supports custom networks first.

Score breakdown

How Pepu Bridge scores

Security: 3.5/10
Ease of use: 6.0/10
Fees: n/a
Features: 3.5/10

Scores run from 0 to 10 and are based only on facts we could verify. Where information was missing we mark the score n/a rather than guess.

What is Pepu Bridge?

Pepu Bridge is the bridge for Pepe Unchained V2, a Layer 2 network built around the PEPU meme token. The project describes its chain as built for speed, low fees and memes. Its protocol listing describes it as a bridge on Ethereum that lets users move assets to and from Pepu.

The bridge page is minimal: a source of Ethereum, a destination of Pepe Unchained V2 and a connect-wallet button. Most of the text is a warning that your wallet must support custom networks, with named wallets that should not be used.

It was listed on a DeFi tracker in late January 2026. TVL is about $186,000, down 15.2% over the last seven days, and no audits are listed. The project is small and new, which shapes its risk profile.

How Pepu Bridge works

A bridge connects two blockchains. You send assets on Ethereum, the bridge records the deposit, and the same value becomes available on the other network, here Pepe Unchained V2. Going back works in reverse.

The page shows Ethereum as the source and Pepe Unchained V2 as the destination. You connect a wallet, choose an amount and sign the transaction. The page does not describe how deposits are held or verified, so the exact mechanism, whether lock-and-mint or another design, is not published there.

Once on the L2, your wallet needs the network added as a custom network to see balances, transact, stake or withdraw. That is why the page warns against wallets that cannot add custom networks.

5 features

Key features

Ethereum to L2 bridging

Moves assets from Ethereum to Pepe Unchained V2 and back, as described by the protocol listing.

Single-purpose interface

The page is a single form with source, destination and a connect-wallet button, which keeps the flow short.

Wallet compatibility warnings

The page lists unsupported wallets and tells users to check custom-network support before bridging.

Access to L2 activity

Bridging gives access to staking and transactions on Pepe Unchained Layer 2, according to the page.

Ecosystem token link

PEPU is the ecosystem token, so the bridge serves as the entry point to the meme-focused L2.

Pros and cons

What we like

Clear single purpose: Ethereum to Pepe Unchained V2 and back
Simple interface with few steps
Upfront warning about incompatible wallets that can prevent user mistakes
Official entry point for the PEPU Layer 2 ecosystem
Listed on a public DeFi tracker with transparent TVL

Watch out for

No security audits are listed for the bridge
TVL is small, about $186,000, and fell 15.2% over seven days
The page names several wallets that cannot be used, including Binance Web3 wallet, Coinbase Smart Wallet, Best Wallet and ByBit cloud wallet
Sending funds to a wallet without custom network support can leave users unable to use them on the L2
Fees, withdrawal times and bridge security design are not published on the page
The older Pepe Unchained chain is marked deprecated, and several PEPU token contracts exist, which adds confusion

Pepu Bridge fees

Pepu Bridge does not publish a fee table on its page. Any bridge transaction on Ethereum needs gas paid in ETH, and that cost varies with network congestion.

Any additional bridge charge, and the time a transfer takes, would show up in your wallet or on the bridge form when you start a transfer. Check these figures before you confirm, especially for small amounts where gas can be a large share.

Is Pepu Bridge safe?

No audits are listed for Pepu Bridge, and the page does not describe who operates it, how funds are secured or whether there is a bug bounty. Bridges hold pooled assets and are a frequent target for exploits, so the lack of published security information matters.

Counterparty risk is also relevant, since the PEPU ecosystem is meme-driven and its token contracts on Ethereum show differing supplies and holder counts. Verify addresses carefully, use a small test transfer and avoid keeping large balances on a young L2. Wallet compatibility is a practical risk: the page warns that funds bridged using unsupported wallets can be hard to access.

6 steps

How to get started with Pepu Bridge

1
Check that your wallet supports custom networks, and avoid the wallets the page lists as unsupported.
2
Add or import the Pepe Unchained V2 network into a compatible wallet, following the project's own instructions.
3
Verify the bridge address in your browser and the PEPU contract against the project's official channels.
4
Connect your wallet on the bridge page and set Ethereum as the source and Pepe Unchained V2 as the destination.
5
Start with a small test transfer and review gas and any bridge fee before confirming.
6
Confirm the assets arrived on the L2 before moving larger amounts.

Open Pepu Bridge

Who Pepu Bridge is for

This bridge is for holders and traders in the Pepe Unchained ecosystem who need to move assets between Ethereum and the V2 Layer 2. It fits users comfortable with custom networks and self-custody wallets. It is a poor fit for people who want audited, large-liquidity infrastructure or who use wallets without custom network support.

Pepu Bridge FAQs

What is Pepu Bridge?

It is a bridge that moves assets from Ethereum to the Pepe Unchained V2 Layer 2 and back. The page shows a simple form with Ethereum as the source and Pepe Unchained V2 as the destination, plus a connect-wallet button.

Which wallets work with Pepu Bridge?

The page says the wallet must support custom networks, and it warns against bridging with Binance Web3 wallet, Coinbase Smart Wallet, Best Wallet and ByBit cloud wallet, among others. If your wallet cannot add custom networks, the page tells you to import your wallet into one that can before bridging.

What does it cost to use Pepu Bridge?

The bridge page does not publish a fee schedule. Ethereum gas applies to any transaction, and any bridge-specific charge would appear in your wallet or on the bridge form before you confirm.

Is Pepu Bridge audited or safe?

No audits are listed for it, and the team's identity and security design are not published on the page. TVL is only around $186,000, so treat it as an early-stage, higher-risk product and bridge only what you can afford to lose.

Does Pepu Bridge have a token?

Yes. PEPU is the token for the Pepe Unchained ecosystem and is used on the Layer 2. Several token contracts carrying the PEPU name show up on Ethereum with different supplies and holder counts, so check the contract address against the project's official channels.

What happened to the older Pepe Unchained chain?

Pepe Unchained V2 is the current network behind this bridge. An earlier Pepe Unchained chain is marked deprecated in a public chain registry, so make sure you are using V2 and not an old route.

Compare

Pepu Bridge alternatives

All alternatives

Base Bridge

Canonical Bridge

Base Bridge is the canonical bridge for moving supported assets and data between Ethereum and Coinbase's Base layer-2 chain, with about $3B in TVL.

TVL $2.87B+2.3%Ethereum

Arbitrum Bridge

Canonical Bridge

Arbitrum Bridge is the canonical bridge that moves ETH and ERC-20 tokens between Ethereum mainnet and the Arbitrum Layer-2 rollup.

TVL $3.27B−1.3%Ethereum

Polygon Bridge

Canonical Bridge

Polygon Bridge is the canonical route between Ethereum and the Polygon network, used by people moving assets onto Polygon via the official Portal.

TVL $2.68B+1.6%Ethereum

Optimism Bridge

Canonical Bridge

Optimism Bridge is the canonical bridge between Ethereum and OP Mainnet, used to move assets to the Optimism layer 2.

TVL $503M−11.0%Ethereum · Base · Optimism

Linea Bridge

Canonical Bridge

Linea Bridge is the official canonical bridge and funding page for moving assets from Ethereum to the Linea layer 2, plus aggregator and exchange routes.

TVL $212M−1.6%Ethereum

Mantle Bridge

Canonical Bridge

Mantle Bridge is the official canonical bridge for moving tokens between Ethereum and the Mantle Layer-2 network, used by Mantle users and developers.

TVL $107M−5.8%Ethereum

Same category