Canonical Bridge · Review
ActiveElysium Bridge Review 2026: Moving Tokens Across Chains
Elysium Bridge is the transfer tool for the Elysium blockchain, moving supported tokens between Elysium, Ethereum and Polygon. It is simple and narrow in scope, with a small amount of value locked and no listed audits.
By the DappsAtlas editorial team · Updated
DappsAtlas score
5.4/10
Mixed
Our verdict on Elysium Bridge
5.4/10Elysium Bridge suits people who already hold tokens on the Elysium chain and need to move them to Ethereum or Polygon. Its main strength is a simple, single-purpose interface with a stated 0.25% fee. The main caveat is risk: no audits are listed, the value locked is small, and it only supports Elysium tokens. Use small amounts first and read the project's docs.
Score breakdown
How Elysium Bridge scores
- Security
- 4.0/10
- Ease of use
- 7.0/10
- Fees
- 7.0/10
- Features
- 4.0/10
Scores run from 0 to 10 and are based only on facts we could verify. Where information was missing we mark the score n/a rather than guess.
What is Elysium Bridge?
Elysium Bridge is the official transfer tool for Elysium, a Substrate-based, EVM-compatible layer 1 blockchain. It lets users send supported Elysium tokens to and from Ethereum and Polygon.
The interface is a single form. You choose a source chain, a destination chain and a token, enter an amount and connect a wallet. A history panel shows past transfers once you connect.
It has been tracked since October 2023. Value locked is about $20,600, with no token of its own and no audits listed. It is a utility for people already using the Elysium ecosystem rather than a general bridge. The team and licensing details are not published on the homepage.
How Elysium Bridge works
A bridge lets you move a token from one blockchain to another. You send tokens on the source chain, and the equivalent amount becomes available on the destination chain. This bridge covers Elysium, Ethereum and Polygon.
In the interface you pick a source network, a destination network and a supported token, then enter an amount and approve the transaction in your wallet. The page warns that a transfer can take from a few seconds to several minutes, and it shows a pending status until it completes.
The navigation includes a liquidity section, so the bridge likely uses pooled liquidity, though the project does not explain the mechanism on its homepage. Documentation for bridging to Elysium says the bridge contract holds no funds. Read the project's docs for the exact flow before moving larger amounts.
4 features
Key features
01
Three-network transfers
Moves supported Elysium tokens between the Elysium chain, Ethereum and Polygon from a single page.
02
Simple transfer form
Choose the source chain, destination chain and token, enter an amount or press Max, then connect a wallet to proceed.
03
Transaction history
Once a wallet is connected, the page shows a transaction history, and it displays a pending status while a transfer is in progress.
04
Liquidity section
A liquidity menu is available in the navigation, which suggests the bridge relies on pooled liquidity, though the project does not explain it on the homepage.
Pros and cons
What we like
- Clear, single-page interface with source, destination and token selection.
- Connects Elysium with two large networks, Ethereum and Polygon.
- Documentation states a modest 0.25% fee, charged once per bridge.
- Documentation states the bridge contract holds no funds.
- No separate bridge token is required.
Watch out for
- Only supported Elysium tokens can be bridged, so it is not a general-purpose bridge.
- No audits are listed for the bridge, and the project does not publish team or security details on its homepage.
- Locked value is small at about $20,600, and it fell 6.3% over seven days.
- Transfers can take from a few seconds to several minutes, with no firm time guarantee.
- Liquidity is tied to a single ecosystem, so the bridge matters only if you use Elysium.
Elysium Bridge fees
Documentation for bridging to Elysium states a bridge fee of 0.25%, charged once per bridge. The homepage itself does not show a fee table, so confirm the figure in the interface before you send.
You will also pay the usual network gas on the chain you send from. Gas depends on network conditions and is not set by the bridge.
Is Elysium Bridge safe?
No audits are listed for the bridge, and the project does not publish team, custody or security details on its homepage. Bridges have been frequent exploit targets across crypto, so the lack of listed audits and the small locked value call for caution.
Documentation says the bridge contract holds no funds, but verify how liquidity is handled before moving large sums. No incidents appear in the information reviewed. Start with a small test transfer and double-check the site address.
6 steps
How to get started with Elysium Bridge
- 1
Open the Elysium Bridge site and check that you are on the official address.
- 2
Connect a compatible wallet and make sure it holds the token you want to move plus gas on the source chain.
- 3
Choose the source network and the destination network, for example Elysium to Polygon.
- 4
Select a supported token and enter an amount, or use Max.
- 5
Review the fee and confirm the transaction in your wallet.
- 6
Wait for the pending status to clear, then check the transaction history and your destination wallet.
Who Elysium Bridge is for
It is for users and builders in the Elysium ecosystem who need to move supported tokens between Elysium, Ethereum and Polygon. It is not aimed at people looking for a broad, multi-chain bridge for arbitrary assets.
Elysium Bridge FAQs
What does Elysium Bridge do?
It moves supported Elysium tokens between the Elysium chain, Ethereum and Polygon. It is not meant for arbitrary tokens, only those the project has enabled.
How much does Elysium Bridge cost?
Documentation for bridging to Elysium states a bridge fee of 0.25%, charged once per bridge. You will also pay normal network gas on the chain you send from. Check the fee shown in the app before confirming.
How long does a transfer take?
The interface says a transaction can take a few seconds to several minutes. The project does not publish a fixed settlement time.
Is Elysium Bridge safe?
No audits are listed for the bridge, and the total value locked is small. Bridges are a common target for exploits, so keep amounts modest and move only what you need.
Which networks does it support?
Ethereum, Polygon and Elysium are the networks named by the project. The interface lets you pick a source and destination and choose a supported token.
Compare
Elysium Bridge alternatives
Base Bridge is the canonical bridge for moving supported assets and data between Ethereum and Coinbase's Base layer-2 chain, with about $3B in TVL.
Arbitrum Bridge is the canonical bridge that moves ETH and ERC-20 tokens between Ethereum mainnet and the Arbitrum Layer-2 rollup.
Polygon Bridge is the canonical route between Ethereum and the Polygon network, used by people moving assets onto Polygon via the official Portal.
Optimism Bridge is the canonical bridge between Ethereum and OP Mainnet, used to move assets to the Optimism layer 2.
Linea Bridge is the official canonical bridge and funding page for moving assets from Ethereum to the Linea layer 2, plus aggregator and exchange routes.
Mantle Bridge is the official canonical bridge for moving tokens between Ethereum and the Mantle Layer-2 network, used by Mantle users and developers.
Same category
More Canonical Bridges
StarkGate is the official StarkWare-developed token bridge between Ethereum and Starknet, for users moving ETH and ERC-20 tokens to Starknet.
Scroll Bridge is the canonical bridge for moving assets between Ethereum and the Scroll zkEVM Layer 2, for users of either network.
Zircuit is an EVM-compatible Ethereum zk-rollup with a canonical bridge, a yield app and an LST/LRT staking hub for DeFi users and builders.
Unichain Bridge is the canonical Ethereum-to-Unichain bridge for moving assets onto Uniswap's OP Stack Layer 2, with about 3.07M USD TVL.
xDAI Stake Bridge is the canonical bridge linking Ethereum and Gnosis Chain, for users who want to move assets and STAKE into the Gnosis ecosystem.
RSK Bridge is the canonical bridge linking Rootstock (RSK) with Bitcoin and Ethereum, used to move assets and obtain rBTC for Bitcoin-based DeFi.
Same chain
More on Polygon
Aave V3 is a non-custodial DeFi lending protocol on 21 chains where users earn interest on deposits or borrow against collateral.
Uniswap V4 is the latest Uniswap DEX version with hooks and concentrated liquidity, running on 22 chains for self-custody token swaps and liquidity provision.
Uniswap V3 is a non-custodial decentralized exchange protocol for token swaps and concentrated liquidity provision across 40+ chains.
OKX is a major centralized crypto exchange for spot and derivatives trading, earn products and a Web3 wallet, with its own OKB token.
LayerZero V2 is a cross-chain messaging protocol and bridge infrastructure for developers and asset issuers, connecting dozens of blockchains.
Morpho Blue is a permissionless lending primitive with about $11.4 billion in TVL on DefiLlama, accessed mainly through curated vaults.
Guides
Guides that mention Elysium Bridge
dApp basics
Elysium Blockchain Ecosystem: Eco-Friendly Claims in 2026Elysium is a public layer-1 chain built on Polkadot by the team Vulcan Forged, and its app ecosystem is still being assembled. This guide explains what the chain is, what the sources show about its status, and how to test its eco-friendly and activity claims yourself.
How we checked
Sources
- 1.defillama.com/protocol/elysium-bridge
- 2.medium.com/@kulsoldier/the-alephium-bridge-a-dive-into-the-bridge-e937459f4a11
Last updated . Spotted an error? Tell us and we will correct it.