How to Connect a dApp to Brave Wallet: Step-by-Step Guide 2026

Connecting a dApp to Brave Wallet means giving the website permission to see your public wallet address and to send requests to your wallet. The site does not gain access to your private keys or recovery phrase. Each action that moves funds or signs a message still needs your approval inside the wallet.

Brave Wallet is built into the Brave browser. When a dApp asks to connect, the browser opens a prompt that shows the site's address and the account you want to share. You choose whether to approve or reject it.

The connection is a permission, not a payment or a deposit. Connecting does not move any tokens. It only lets the site show your balances and prepare requests that you then review.

This matters because many dApp problems come from confusing a connection with an approval. A connection can be removed at any time. A token spending approval, which some protocols request separately, can leave a contract able to move tokens until you revoke it. Treat both with care.

Knowing this difference helps you decide how much to trust a site. A reasonable first step is to connect, look at what the site asks for in each later prompt, and only then approve anything that moves value.

Before you connect anything, make sure your wallet is set up and your recovery phrase is stored safely. Brave Wallet creates a non-custodial wallet, which means you control the keys. If you lose the recovery phrase, nobody can restore access for you.

Use these steps:

• Update Brave to the current version from the official download page.
• Open the wallet from the toolbar and create a new wallet or restore an existing one.
• Write down the recovery phrase on paper and store it offline. Do not save it in a screenshot, a note app or an email.
• Set a password that you do not use anywhere else.
• Confirm that the wallet unlocks before you visit a dApp.

Brave Wallet has documentation on its support site that covers setup on desktop and mobile. Setup steps can change between releases, so check the current guidance if a screen looks different from what you expect.

Keep a small amount of crypto in the account you use for first tests. A low balance limits losses if you make a mistake while learning the flow. You can always move more funds later once you are comfortable with the approvals.

Before connecting, identify which network the dApp uses. Many sites run on Ethereum or another EVM chain, such as a Layer 2 network. Some run on Solana. Brave Wallet supports Ethereum and other EVM networks and Solana, but the exact list of networks and features can differ by platform and version.

A quick check:

• Read the dApp's documentation or its footer for the network name.
• Look at the network selector in the site after it loads.
• Compare the network with the one shown in Brave Wallet.

If the network is not supported by Brave Wallet, the site may not be able to read your account correctly. In that case, check the official support pages before you try to add the network manually.

Network confusion causes many failed transactions. The same token symbol can exist on several chains, and each version is a different asset. Always confirm the chain name, not just the token name, before you send funds.

If you are unsure, do not guess. Ask in the project's official channels or read the documentation first. A wrong network choice can cost time or lead to funds being sent to an address that cannot receive them.

The general flow is similar across most dApps, though button labels vary.

1. Open the dApp in a Brave tab. Check the web address carefully before you go on, and type it yourself or use a bookmark from the project's official site.
2. Look for a button labelled Connect wallet, Connect or Log in.
3. Choose the option for a browser wallet or injected wallet, and select Brave Wallet if the site lists several wallets.
4. The Brave Wallet prompt opens. Unlock the wallet if it asks for your password.
5. Review the site address and the account being shared.
6. Approve only if the address matches the site you intended to use.
7. Once connected, the site usually shows your address, a shortened version of it or your balance.

If nothing happens after you click the button, check whether a pop-up was blocked or whether the wallet window opened behind the browser. Some sites also need the page to finish loading before the button responds.

Do not connect the same wallet to many unfamiliar sites in one session. Connect only the sites you need for a specific task. Disconnecting later is easy, but it is better to limit exposure from the start.

When Brave Wallet asks for approval, read the prompt carefully. It typically shows the site address, the requested permissions and the account that will be shared. Some prompts also show the network.

Check these items:

• The site address matches the official domain you expected.
• The account is the one you intend to use. If you hold several accounts, pick the correct one before approving.
• The permissions are limited to connecting and viewing. A connection should not ask for your recovery phrase.
• The request does not ask you to sign a message you do not understand.

If anything looks wrong, reject the request and close the prompt. You can always retry after you check the address again. Phishing sites often copy the look of popular dApps, so a visually correct page is not proof of identity.

After approval, the dApp can see your public address. It may ask for signatures for login or other actions. Read every signature request as carefully as a transaction. A signature can authorise actions, even when no transfer is shown directly.

When in doubt, check the project's official announcements or documentation for the expected connection flow.

Many dApps need you to be on a particular network before they will load your balances or accept a transaction. Brave Wallet lets you change networks from the wallet interface. The dApp may also prompt you to switch.

To switch networks:

• Open Brave Wallet and use the network selector.
• Choose the network the dApp requires. If the list does not include it, look for an add or custom network option in the wallet settings.
• When adding a network manually, enter the official chain details from the network's documentation. Copy them carefully. A wrong chain ID or RPC address can send requests to the wrong place.

After you switch, refresh the dApp and confirm the connected account and network match. Some sites cache state, so a refresh avoids confusion.

Never add a network from a link or message you did not expect. Phishing campaigns often offer fake network additions that point to unofficial endpoints. Use the network's official documentation or its published details.

If you move assets between networks, use a bridge that the network publishes as official or a well-known aggregator. Verify the destination chain before confirming any transfer.

Some sites ask for a wallet provider without naming a specific one. In that case, the browser decides which wallet answers the request. Brave lets you choose how wallet requests are handled from its settings, so you can keep Brave Wallet as the default when that suits you.

To review this setting:

• Open Brave settings and go to the Wallet or Web3 section.
• Look for an option that controls which wallet handles dApp requests.
• Choose the option that matches your preference. Some users prefer to be asked each time, which adds a step but makes the choice explicit.

If you also use another browser wallet extension, check for conflicts. Two wallets can both try to respond to the same request, which can confuse which account is connected. Disabling extensions you do not use is a simple way to avoid that.

Wallet settings can change between Brave releases. Use the current Brave support documentation to find the exact menu names and options for your version rather than relying on older screenshots.

Connections accumulate over time. Review them regularly and remove sites you no longer use.

To manage connections:

• Open Brave Wallet and look for connected sites or account permissions.
• Remove any site you no longer use or do not recognise.
• Clear the site's permissions in Brave's site settings if the wallet list does not show it.

Revoking a connection stops the site from sending new requests through your wallet. It does not reverse transactions already signed or confirmed.

For token spending approvals, which are separate from connections, use a reputable approval review tool that works with your network. Review which contracts can spend your tokens and revoke any approvals you no longer need. Many approvals are unlimited by default, so check the amounts before you approve.

Keep a note of the sites you have used for important actions. This makes it easier to revoke access quickly if a site is compromised or if you stop using it.

Most connection problems have simple causes. Work through this list in order:

• Wallet is locked. Unlock Brave Wallet and try again.
• Pop-up blocked. Allow pop-ups for the site or close other pending prompts.
• Wrong network. Switch to the network the dApp expects.
• Stale connection. Disconnect the site in the wallet, refresh the page and reconnect.
• Outdated browser. Update Brave to the current version.
• Conflicting wallet extension. Disable other wallet extensions for a test.
• Site cache. Clear the site's cookies or data and reload.

If the dApp still fails, check its official documentation or status channels. Some sites are down or have known issues with certain wallets. Do not switch to an unofficial support account that messages you first, since impersonation is common.

If you are working on Brave Rewards rather than a dApp, use the official Brave support and community pages for current connection rules. Reports in community forums have described connection limits tied to previous connections and address changes, so read the current guidance before changing addresses.

Avoid any tool that asks for your recovery phrase to fix a connection. No legitimate support process needs it.

Connecting is low risk when you check each step, but phishing and fake sites are common.

Practical checks before you approve:

• Type the dApp address yourself or use a bookmark from the project's official site.
• Check the domain spelling. Small changes such as an extra word or a different ending are a warning sign.
• Never enter your recovery phrase into a website, a chat or a support form.
• Reject unexpected sign-in or connection requests that appear after you click a link from a message.
• Read each signature request, since a signature can authorise an action.
• Keep only small balances in accounts you use for testing new sites.
• Use a separate account for high-value holdings if you can.

If you think you have approved something malicious, move remaining funds to a new wallet you control, revoke the relevant approvals and report the incident to the project and to the wallet's support channels. Act quickly, because attackers often drain accounts soon after a bad approval.

Wallet safety is a habit. The more often you pause to check an address and a request, the less likely you are to lose funds to a fake page.